5 April 2009 in Engineering Applications of Artificial Intelligence
21 August 2018 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
1 June 2016 in Engineering Science and Technology, an International Journal
A hybrid machine (HM) is a system integrating two types of motor; servo and constant velocity with a mechanism. The purpose is to make use of the energy in the system efficiently with a flexible system having more than one degree of freedom (DOF). A review is included on hybrid press systems. This study is included as a part of an industrial project used for metal forming. The system given here includes a 7 link mechanism, one of link is driven by a constant velocity motor (CV) and the other is driven by a servo motor (SM). Kinematics analysis of the hybrid driven mechanism is presented here as inverse kinematics analysis. Motion design is very crucial step when using a hybrid machine. So motion design procedure is given with motion curve examples needed. Curve Fitting Toolbox (CFT) in Matlab® is offered as an auxiliary method which can be successfully applied. Motion characteristics are chosen by looking at requirements taken from metal forming industry. Results are then presented herein
11 January 2003 in Electrical Engineering
31 December 2022 in TEKSTİL VE KONFEKSİYON
Fabric Automatic Visual Inspection (FAVI) system provides reliable performance on fabric defects inspection. This study presents a machine vision system developed to adapt in circular knitting machines where fabric defects can be automatically controlled and detected defects can be classified. The knitted fabric surface are detected during real-time manufacturing. For the classification process, three different transfer learning architectures (ResNet-50, AlexNet, GoogLeNet) have been applied. The five common knitted fabric defects were recognized with the artificial intelligence-based software and classified with an average success rate of 98% using ResNet-50 architecture. The success rates of the trained networks were compared.
1 November 2022 in TEKSTİL VE KONFEKSİYON
The abrage fault inspection and bobbin diameter measurement are very important processes in yarn manufacturing industry. These processes are performed manually, and so they are difficult, low efficient, time-consuming processes. The abrage faults are seen as colour or shade difference on the dyed fabric. This happens when the bobbins including abrage are converted to the fabric form, mistakes in colour differences are seen after dyeing process. An automatic machine vision system was developed for detecting abrage fault, and bobbin diameter from yarn bobbin cross-section view. Image processing software was developed and applied on different sizes of bobbin samples including different types of abrage fault. The success of vision system was statistically evaluated by detecting the bobbin abrage faults with 95.83% accuracy. In addition, the bobbin diameters obtained from the developed image processing algorithm were statistically analysed and the correlation coefficient (R2=0.99) was calculated.