29 October 2018 in Latin American Journal of Solids and Structures
This paper presents a methodology for optimization of beam-column connections of plane steel frames. The objective is to obtain beam- column connections mechanically more efficient and with minimum cost by determination of the optimal dimensions for the components of the connection; satisfying mechanical constraints associated with the bending moment and the rotational stiffness of the connection, without compromising its safety and integrity. Minimum and maximum limits of geometric parameters are considered, according to current regulations. Algorithms were developed to calculate the bending moment and the rotational stiffness of the connection using the “Method of Components” of Eurocode 3. Initially, it was developed a digital database with structural profiles, steel plates and commercial bolts obtained from catalogs of manufacturers, with automatic access of the data by the computational modules of structural analysis and optimization. In the optimization model, it is adopted the connection with extended end plate without stiffeners, the design variables are the dimensions and the thickness of the end plate, the diameter and the location of the bolts. In the optimization process, we use genetic algorithms with continuous and discrete variables, with the discrete variables being associated to the database. In this way, this paper presents a computational tool fully developed in MATLAB® environment for analysis and optimal design of beam-column connections for plane steel frames. Applications that show quite satisfactory results when compared with results available in the literature are presented.
1 June 2023 in REM - International Engineering Journal
Seeking to define more robust and executable structures, this article presents a computational framework for the optimal design of steel truss frames, which integrates two software of great prominence in structural engineering, MATLAB and ANSYS. Computational interfaces were created to enable the automation of the iterative optimization process. The optimization algorithm and computational interfaces were developed on the MATLAB platform, while structural analyses were performed with the ANSYS Mechanical APDL platform. Some details of the computational implementation are presented herein. The objective is to minimize the cost of structures by determining the optimal positioning of nodal coordinates and the optimal choice of commercially available structural profiles - shape and size optimization, respectively. For shape optimization, a computational model was defined to automatically generate the geometry of the structure, maintaining some intrinsic relations of symmetry and collinearity between elements. The design constraints are critical nodal displacements, stresses, and slenderness of elements, following the requirements of ABNT NBR 8800:2008. To exemplify the application of the proposed methodology, this article presents the optimal design of trusses for roofs of industrial sheds, considering its non-linear geometric behavior, typical of this type of structure.