Department of Mechanical and Aerospace Engineering, The Hong Kong University of Science and Technology, Hong Kong Special Administrative Region of China, People’s Republic of China
Auto-generated profile, based on publicly available information
Wenhao Chen
Department of Mechanical and Aerospace Engineering, The Hong Kong University of Science and Technology, Hong Kong Special Administrative Region of China, People’s Republic of China
This letter highlights a significant advancement in the miniaturization of conventional variable reluctance sensors (VRSs) using an optimized micromachined spiral coil and a cylindrical magnet. The primary objective is to create low-cost, high-performance micro-VRSs (µVRS) that can measure the position, speed, and proximity of ferrous components. The sensitivity of the µVRS was optimized through theoretical analysis, aiming to achieve a minimum noise equivalent magnetic induction (NEMI). The fabrication of the µVRS involved using a cost-effective single-mask lithography process to create a planar spiral inductor on a silicon wafer. Once the fabrication was complete, the µVRS was wire-bonded to a printed circuit board (PCB). The cylindrical magnet was then affixed to the backside of the PCB, resulting in a passive µVRS. The presented µVRS successfully measured the position and rotation speed of an iron gear around the shaft of a stepper motor with high accuracy. The high sensitivity of the µVRS enabled the generation of an output electrical signal of sufficient magnitude, which could be measured using an oscilloscope or a commercial analog-to-digital converter. The distinguishing feature of the presented µVRS is its complete passivity, as it operates without any power source, unlike semiconductor-based magnetic field sensors, such as Hall effect sensors, commonly used in position and speed sensors. The passive nature, robustness, low-temperature dependency, and small size of the presented µVRS make it particularly suitable for smart energy-efficient buildings and smart manufacturing to reduce carbon footprint in the era of AIoT.
26 April 2024 in Journal of Micromechanics and Microengineering
This paper proposes an efficient nonlinear one-dimensional (1D) compact mass-damper-spring model to predict the dynamic response of electrostatic resonant micro-electro-mechanical system (MEMS) mirrors with cascaded structures. The time-dependent damping moment due to viscous shear and pressure drag is computed using semi-empirical analytical equations for comb-drive structures and device frames. Nonlinear electrostatic force induced by the comb drives is efficiently acquired based on the hybrid method. The optimized device is fabricated using MEMS fabrication processes based on a 4-inch silicon-on-insulator wafer. The proposed compact model with the measured key parameters from the fabricated device shows excellent capability to accurately predict nonlinear dynamic responses of the fabricated device, including parametric excitation and hysteretic frequency response, with an average error of less than 5%. In particular, our 1D model is three orders of magnitude faster than the conventional finite element method model (0.8 s versus 1 h), enabling efficient system-level optimization of the critical design parameters. Based on the parametric study, electrode gap distance and torsion spring width are found to be two critical design parameters and dimensional analysis is conducted for design optimization with scan angle enhancing from 16.8° to 24° compared with the first design.