23 April 2025 in Nature Communications
Electrostatic capacitors are critical components in the power system of electric vehicles (EVs). The current commercially available solutions are largely based on ferroelectric oxides of which the permittivity decrease with increasing electric field. Here, we propose a high entropy modulation design in a quantum paraelectric-ferroelectric/antiferroelectric matrix, which enables a stable and field-independent energy charge/discharge response across a wide voltage range. By effectively synergizing the high efficiency (η) of quantum paraelectrics and the high polarization of the ferroelectric/anti-ferroelectric matrix with the entropy regulator, a high recoverable energy density (Wrec) of 13.3 J cm−3 with an η of 92.4% is achieved in the bulk state of the perovskite material, promising for device scale-up. Versatile polar regions as well as a defect-less microstructure is achieved by the optimized compositional design and material processing. On a mesoscopic level, the electrical microstructure of the material is engineered to provide a large breakdown strength (Eb) of 750 kV/cm, which is confirmed by the resolved electrochemical information and finite-element simulation. The proposed strategy provides a new path for designing high performance next generation energy storage/power converting dielectrics. This demonstration of quantum paraelectrics for energy storage application is expected to stimulate extensive efforts in the area.
7 April 2025 in Nature Communications
Thermoelectric technology exhibits significant potential for power generation and electronic cooling. In this study, we report the achievement of exceptional thermoelectric performance and high plasticity in stable Cu2Se/SnSe composites. A novel matrix plainification strategy was employed to eliminate lattice vacancies within the Cu2Se matrix of the Cu2Se/SnSe composites, resulting in a marked improvement in carrier mobility and power factor. The presence of quasi-coherent interfaces induces phonon scattering, reducing lattice thermal conductivity without compromising carrier mobility. Consequently, a high figure of merit (ZT) of 3.3 was attained in the Cu2Se/5 wt.% Sn0.96Pb0.01Zn0.03Se composite. Additionally, the presence of high-density nanotwins imparts remarkable plasticity to the composite, yielding a compressive strain of 12%. The secondary phase contributes to the stability of the composite by hindering the extensive migration of Cu ions through bonding interactions. Our findings present a novel strategy for enhancing the thermoelectric performance of composite semiconductors, with potential applicability to other thermoelectric systems.
31 January 2026 in Nature Communications
Here, we achieve a high peak ZT of 2.5 as well as an exceptional average ZT of 1.9 through nanotwin architecture and inducing ultra-high valley degeneracy. We find that nanotwins, ordered vacancy arrays and point defects serve as intense phonon scattering centers for enhancing wide-frequency phonon scattering, resulting in ultralow lattice thermal conductivity in GeTe. Interestingly, density-functional theory calculations reveal that CuBiS 2 alloying realizes refined valence band alignment in GeTe, generating an ultra-high valley degeneracy of 22. The dramatic enhancement of the Seebeck coefficient induced by the ultra-high valley degeneracy contributes to remarkably enhanced power factor over a very wide temperature range. The maximum power factor reaches as high as 49 μW cm -1 K -2 . Consequently, a high peak ZT as well as a large average ZT are realized in GeTe without involving toxic elements. Importantly, the presence of nanotwins boundaries in GeTe effectively provides adequate barriers to block dislocation motion, leading to excellent hardness and compressive strength. Our finding provides a feasible pathway to design fascinating thermoelectric materials with high thermoelectric performance and mechanical properties.
24 October 2025 in Nature Communications
Multilayer ceramic capacitors, as critical components in aerospace applications, demand thorough reliability assessment under gamma ray irradiation in extreme environments. While previous studies predominantly employed ex situ high-dose-rate radiation methods, significant knowledge gaps remain regarding dose-rate dependencies, particularly at lower levels. This investigation pioneers comprehensive in situ capacitance experimentation with controlled dose-rate variations coupled with multiscale structural characterization spanning from average to state-of-the-art atomic-scale probing. Our findings reveal three distinct radiation response mechanisms in BaTiO3-based MLCCs: (i) classical total ionizing dose effects, (ii) enhanced low dose rate sensitivity effect, and (iii) an intriguing partial self-recovery effect. Through a systematic evaluation of collision dynamics, defect evolution pathways, and microstructural transformations, we report that radiation-induced modifications in defect concentration and spatial distribution fundamentally govern charge trapping efficiency and domain wall pinning behavior. These microstructural alterations ultimately dictate the macroscopic manifestation of the effects of gamma radiation degradation.
16 March 2024 in Journal of Advanced Dielectrics
Large-size electronic-grade polycrystalline silicon is an important material in the semiconductor industry with broad application prospects. However, electronic-grade polycrystalline silicon has extremely high requirements for production technology and currently faces challenges such as carbon impurity breakdown, microstructure and composition nonuniformity and a lack of methods for preparing large-size mirror-like polycrystalline silicon samples. This paper innovatively uses physical methods such as wire cutting, mechanical grinding and ion thinning polishing to prepare large-size polycrystalline silicon samples that are clean, smooth, free from wear and have clear crystal defects. The material was characterized at both macroscopic and microscopic levels using metallographic microscopy, scanning electron microscopy (SEM) with backscattered electron diffraction (EBSD) techniques and scanning transmission electron microscopy (STEM). The crystal structure changes from single crystal silicon core to the surface of the bulk in the large-size polycrystalline silicon samples were revealed, providing a technical basis for optimizing and improving production processes.
30 July 2025 in Nanoscale Advances
Atomic-level defect characterization in poly-Si via SEM-EBSD and aberration-corrected STEM reveals interface transition layers, grain structures, and orientation distributions during electronic-grade polysilicon deposition.