Pınar Uyan

Pınar Uyan

Auto-generated profile, based on publicly available information

Pınar Uyan

Vocational School, Metallurgy Program, Bilecik Seyh Edebali University, Bilecik, Turkey

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 March 2020 in Metals and Materials International
Verified
Journal Article
Closed access
PDF file
MGMevlüt Gürbüz
Mevlüt Gürbüz
TMTuğba Mutuk
Tuğba Mutuk
PUPınar Uyan
Pınar Uyan

1 January 2018 in Universal Journal of Materials Science
Verified
Journal Article
Open access
PDF file
PUPınar Uyan
Pınar Uyan
STServet Turan
Servet Turan
As a result of the studies that have been made for increasing the thermal conductivity of Si 3 N 4 , increasing thermal conductivity values have paved the way for the technologic applications such as using the Si 3 N 4 in electronic devices as heatsink and substrate. Two important parameters such as density and grain boundary phase that affect the thermal conductivity of the Si 3 N 4 ceramics are based on the sintering additives and techniques. Exposure time to gas applied in the sintering and cooling cycle after sintering are the critical factors that affect the intergranular phase crystallization. In this study, the effect of Y 2 O 3 doped Si 3 N 4 ceramics and different cooling cycle after gas-pressure sintering to the phase crystallization and thermal diffusivity was researched. The samples were subjected to two different cooling cycles after sintering. The thermal diffusivity value of the sample applied by slow cooling cycle is 17.79 mm 2 /sec, the sample applied by rapid cooling cycle is 16.2 mm 2 /sec. As a result of slow cooling cycle, the crystallization has increased but thermal diffusivity has decreased at the rate of ~ 8.94%.

1 January 2018 in Universal Journal of Materials Science
Verified
Journal Article
Open access
PDF file
PUPınar Uyan
Pınar Uyan
RGRemzi Gürler
Remzi Gürler
Nowadays, light part production by the strategies of performance improving known as 'Engine Downsizing' by decreasing the engine size is popular. Al-Zn-Mg alloyed composites reinforced by SiC particle are mostly produced by powder metallurgy. In fact, Liquid mixing casting technique alternatively developed against the powder metallurgy has more than advantageous when taking into the consideration of its production capacity, production cost and part production similar to the definitive form. In this study, the hardness variation of SiC particle reinforced composites manufactured by the method of affordable 'Vortex Casting' and in different amounts by weight and 7075 alloy after aging process in different times at 140℃ and 230℃ was reviewed and their microstructure analyses were made accordingly. After 16 hours aging of 7075 alloy and the composites reinforced by 5% SiC at 140℃ and 12 hours aging in the composites reinforced by 3% SiC, at 230℃, after 9 hours aging in all materials, the maximum hardness value was measured. In higher aging temperature, due to the fact that max hardness was achieved in shorter period, in lower aging temperature, higher hardness was achieved.