The article summarizes the results of the long-term research on the anthropomorphic soil in reclaimed and successive areas of the Most Basin in Czech Republic. The main attention is paid to the main...
Foam glass production process redounds to large quantities of waste that, if not recycled, are stockpiled in the environment. In this work, increasing amounts of waste foam glass were used to produce metakaolin-based alkali-activated composites. Phase composition and morphology were investigated by means of X-ray powder diffraction, Fourier-transform infrared spectroscopy and scanning electron microscopy. Subsequently, the physical properties of the materials (density, porosity, thermal conductivity and mechanical strength) were determined. The analysis showed that waste foam glass functioned as an aggregate, introducing irregular voids in the matrix. The obtained composites were largely porous (>45%), with a thermal conductivity coefficient similar to that of timber (<0.2 W/m∙K). Optimum compressive strength was achieved for 10% incorporation of the waste by weight in the binder. The resulting mechanical properties suggest the suitability of the produced materials for use in thermal insulating applications where high load-bearing capacities are not required. Mechanical or chemical treatment of the waste is recommended for further exploitation of its potential in participating in the alkali activation process.
Due to a technical error volume 53, issue 4, 2017 has been published online with an incorrect cover data. The issue has erroneously been distributed with the cover date July 2018. The correct caver...
1 September 2019 in Multidisciplinary Aspects of Production Engineering
The Brown Coal Research Institute started the solving of the research project based on the optimisation of the shape and material of ground and mining machines in 2018. This research is necessary for increasing of efficiency of mining process in conditions of the Most Basin. The very important part of the research was the geological characteristic of the Most Basin main mining localities. Evaluation of the geological situation of the Bílina, Vršany and Libouš mines (mining of the overburden rocks in the ČSA mine finished) is the first stage of the solving of the project described in this article. The occurrence of sandy strata and the parameters of hard rocks are the most important parameters. The most important used laboratory analyses were the content of crystalline quartz, content of siderite, content of calcite and compressive strength. The location of the overburden cuts with similar mining conditions in different mining localities, very important for need of future research, is described in the end of this article.
Weather and climate are parameters vital for the development and flourish of human activities, and they crucially affect mining activities. Coal and lignite (brown coal) mining operations can be aided by appropriate weather or stopped by an extreme weather event that might have catastrophic consequences for a mining area. The same stands for closed and abandoned coal mines, as extreme weather events can have severe consequences. This work aims to obtain a comprehensive overview of the climatic conditions by documenting and reporting them in various European coal and lignite mining regions. Specifically, the chosen regions cover Europe from the north (the United Kingdom) to the south (Greece), from the east (Poland, the Czech Republic) to the west (Spain), and through Europe’s center (Germany). A climate baseline is created for the chosen regions to serve as a reference for safety assessment and for evaluating future climate changes. Initially, the general climate of each region was evaluated; additionally, an extensive climate database from 1990 to 2020 was created, including the mean annual temperature and precipitation. Mean values and general trends of increase or decrease during the last 30 years are of interest and were compared for all areas.