20 February 2017 in IEEE Transactions on Aerospace and Electronic Systems
Constant false alarm rate (CFAR) is a desired property for target detection in unknown and nonstationary sea clutter. Analysis of the experimental data shows that gamma distribution is a promising model for sea clutter. A robust CFAR method is proposed for target detection in nonhomogeneous gamma-distributed clutter, using the weighted amplitude iteration of the samples in the reference window as the adaptive threshold. By combining the advantages of cell-averaging CFAR (CA-CFAR), greatest of selection CFAR (GO-CFAR), and ordered statistic CFAR (OS-CFAR), the proposed method shows a similar detection performance as the CA-CFAR in homogenous gamma-distributed environment with a known shape parameter. In a nonhomogeneous environment, the proposed method also works robustly with the appropriate weighting factors, whereas CA-, GO-, and OS-CFAR methods exhibit a serious degradation of the detection probability and an excessive increase in the false alarm rate. The detection performance of the proposed method in gamma-distributed clutter with different shape parameters is also presented by simulation. The superiority of the proposed method, which is applicable to different clutter scenarios with corresponding weighting factors, is investigated and verified by simulations and experimental data.
21 October 2019 in IEEE Transactions on Geoscience and Remote Sensing
In the high-resolution inverse synthetic aperture radar (ISAR) imaging of low-earth-orbit space targets, the received signal from one range bin can be modeled as a multicomponent cubic phase signal (CPS) after motion compensation. The chirp rates and the quadratic chirp rates of the multicomponent CPS need to be estimated with parameter estimation algorithms to obtain the focused ISAR image. In this article, a new parametric range-instantaneous-Doppler ISAR imaging method is proposed, which introduces a new algorithm for parameter estimation of multicomponent CPSs. The cross terms of the generalized cubic phase function (GCPF) are analyzed. By eliminating the cross terms in the ambiguity function domain, the coherent integrated smoothed GCPF (CISGCPF) is proposed to estimate the quadratic chirp rates. Numerical examples are provided to verify the accuracy of the parameter estimation and the effectiveness of the cross-term suppression for CISGCPF in processing multicomponent signals. Simulated and real data imaging results demonstrate the performance of the CISGCPF-based ISAR imaging method. Comparisons with the existing algorithms show that the proposed method is effective in reconstructing focused images with less fake scatterers.
1 January 2019 in IET Radar, Sonar & Navigation
Constant false alarm rate (CFAR) is the desired property for automatic target detection in an unknown and non‐stationary background. Here, a modified cell averaging CFAR (CA‐CFAR) detector based on the Grubbs criterion (CAG‐CFAR) is proposed for target detection in non‐homogeneous background. The CFAR property of the CAG‐CFAR with respect to the distribution parameter in exponential‐distributed background is verified via Monte Carlo simulations. The detection performances of the proposed method in scenarios of multiple targets and clutter edges are investigated with different significance levels of the Grubbs criterion and sizes of reference window. Results show that the CAG‐CFAR detector exhibits a similar detection performance as the CA‐CFAR in homogenous environment with an appropriate significance level. At clutter edges, the CAG‐CFAR detector attains a similar and acceptable false alarm rate control compared to several relevant competitors. In the multiple‐target scenario, the proposed method achieves a robust detection performance with a low computational burden, whereas the competitors suffer performance degradations in varying degree. Simulations and experimental results verify the effectiveness and superiority of the proposed method in multiple‐target situation with an unknown number of the interfering targets.
10 August 2018 in IEEE Geoscience and Remote Sensing Letters
Constant false alarm rate (CFAR) is the desired property for automatic target detection in unknown and nonstationary background. In this letter, an analysis of the experimental data shows that gamma (GM) distribution is a promising model for sea clutter. Furthermore, a modified cell-averaging (CA) detector for GM-distributed clutter is proposed by using the maximum likelihood estimation method. Theoretical analysis demonstrates that the proposed detector maintains the CFAR property with respect to the scale parameter of the GM-distributed background. The proposed detector is verified to be optimal in homogenous GM-distributed clutter with a known shape parameter when compared with CA, greatest of selection, ordered statistic (OS), and weighted amplitude iteration (WAI) detectors. At clutter edges, the proposed method attains a similar false alarm rate control compared with the CA, OS, and WAI detectors. In multiple-target scenario, the proposed method works effectively and robustly, whereas the competitors suffer performance degradation in varying degree. Simulation and experimental results demonstrate the superiority and generality of the proposed method.
1 August 2021 in Digital Signal Processing
7 June 2016 in IEEE Geoscience and Remote Sensing Letters
This letter presents a multiscale edge detection method for multilook polarimetric synthetic aperture radar (PolSAR) images based on the nonsubsampled contourlet transform (NSCT). The NSCT can provide flexible multiscale and directional decomposition. In the multiscale decomposition, the coefficients of the nonsubsampled pyramid in the NSCT are calculated via maximizing the polarimetric contrast between the adjacent subband levels, instead of using the difference of the adjacent subbands as used in the additive noise model. By this way, we make the NSCT applicable to PolSAR data and multiband data. Then, the edges are detected in the NSCT domain based on a fusion of the directional subband coefficients at different scales. Experimental results with both simulated and real PolSAR data show that the present approach is robust to noise and the extracted edges are complete and continuous.