This paper describes a small unmanned aerial vehicle (UAV)-based synthetic aperture radar (SAR) system using low-cost radar (5–6 GHz), position (GNSS/RTK) and attitude (IMU) sensors for the generation of high-resolution images. Measurements using straight as well as highly curved flight trajectories and varying flight speeds are presented, showing range and cross-range lobe-widths close to the theoretical limits. An analysis of the improvements obtained by the use of attitude angles (roll, pitch, and yaw), to correct for the relative offsets in antenna positions as the UAV moves, is included. A capability to generate SAR images onboard with the back-projection algorithm has been implemented using a GPU accelerated single-board computer. Generated images are transmitted to ground using a Wi-Fi data link.
2 January 2019 in SIAM Journal on Scientific Computing
A compression driver is an electro-acoustic transducer with considerably higher efficiency than direct radiating loudspeakers, thanks to the increased radiation resistance caused by a large vibrating diaphragm placed in a compression chamber with small openings. The transition section between compression chamber and output waveguide, the phase plug, must be carefully designed to avoid irregularities in the output sound pressure level (SPL) as a function of frequency. Here we present a shape optimization method based on an implicit level-set description and adjoint sensitivity analysis, which enables a large number of design parameters and vast design freedom. The CutFEM approach, a fictitious domain finite element method, removes the need for mesh updates and makes the method robust and computationally inexpensive. Numerical experiments for a generic annular diaphragm compression driver are presented, with optimized designs showing only minor frequency irregularities. Two different objective functions are...
1 September 2018 in The Journal of the Acoustical Society of America
The linearized, compressible Navier-Stokes equations can be used to model acoustic wave propagation in the presence of viscous and thermal boundary layers. However, acoustic boundary layers are notorious for invoking prohibitively high resolution requirements on numerical solutions of the equations. We derive and present a strategy for how viscous and thermal boundary-layer effects can be represented as a boundary condition on the standard Helmholtz equation for the acoustic pressure. This boundary condition constitutes an $O(\delta)$ perturbation, where $\delta$ is the boundary-layer thickness, of the vanishing Neumann condition for the acoustic pressure associated with a lossless sound-hard wall. The approximate model is valid when the wavelength and the minimum radius of curvature of the wall is much larger than the boundary layer thickness. In the special case of sound propagation in a cylindrical duct, the model collapses to the classical Kirchhoff solution. We assess the model in the case of sound propagation through a compression driver, a kind of transducer that is commonly used to feed horn loudspeakers. Due to the presence of shallow chambers and thin slits in the device, it is crucial to include modeling of visco-thermal losses in the acoustic analysis. The transmitted power spectrum through the device calculated numerically using our model agrees well with computations using a hybrid model, where the full linearized, compressible Navier-Stokes equations are solved in the narrow regions of the device and the inviscid Helmholtz equations elsewhere. However, our model needs almost two orders of magnitude less memory and computational time than the more complete model.