The effect of temperature on the kinetic parameters involved in the main reactions of the anaerobic digestion process was studied. Batch tests with starch, glucose and acetic acid as substrates for hydrolysis, acidogenesis and methanogenesis, respectively, were performed in a temperature range between 15 and 45°C. First order kinetics was assumed to determine the hydrolysis rate constant, while Monod and Haldane kinetics were considered for acidogenesis and methanogenesis, respectively. The results obtained showed that the anaerobic process is strongly influenced by temperature, with acidogenesis exerting the highest effect. The Cardinal Temperature Model 1 with an inflection point (CTM1) fitted properly the experimental data in the whole temperature range, except for the maximum degradation rate of acidogenesis. A simple case-study assessing the effect of temperature on an anaerobic CSTR performance indicated that with relatively simple substrates, like starch, the limiting reaction would change depending on temperature. However, when more complex substrates are used (e.g. sewage sludge), the hydrolysis might become more quickly into the limiting step.
Hydrogen production by dark fermentation is one promising technology. However, there are challenges in improving the performance and efficiency of the process. The important factors that must be considered to obtain a suitable process are the source of the inoculum and its pre-treatment, types of substrates, the reactor configurations and the hydrogen partial pressure. Furthermore, to obtain high-quality hydrogen, it is necessary to integrate an effective separation procedure that is compatible with the intrinsic characteristics of a biological process. Recent studies have suggested that a stable and robust process could be established if there was an effective selection of a mixed microbial consortium with metabolic pathways directly targeted to high hydrogen yields. Additionally, the integration of membrane technology for the extraction and separation of the hydrogen produced has advantages for the upgrading step, because this technology could play an important role in reducing the negative effect of the hydrogen partial pressure. Using this technology, it has been possible to implement a production–purification system, the ‘hydrogen-extractive membrane bioreactor’. This configuration has great potential for direct applications, such as fuel cells, but studies of new membrane materials, module designs and reactor configurations are required to achieve higher separation efficiencies.