Seismic exploration employing wide-azimuth, broadband, high-density data (i.e. double-width single-height; “double-width” means wide-azimuth and broadband; “single-height” means high-density data, generally referring to small-bin-size data (less than 10 × 10 m); and double-width single-height is an abbreviation) enables more complete wave field information to be recorded, reduces aliasing, and produces abundant low-frequency information, which is conducive to broadband processing and the anisotropic study of seismic data. Based on the acquired double-width single-height seismic data, in this paper, we analyse the wave field characteristics, signal-to-noise ratio and frequency of seismic data. We also design a procedure for processing double-width single-height seismic data. The key techniques in the proposed procedure focus on the high-resolution amplitude-preserved characteristics of double-width single-height seismic data obtained with a low-frequency vibroseis sweep. Faults and sand bodies are characterised and described by using the final imaging results, which embody the advantages of double-width single-height seismic exploration.
For seismic wave propagation in media with horizontal transverse isotropy (HTI), kinematic and dynamic attributes are anisotropic. P waves propagate slower in perpendicular to fracture azimuth than parallel to it, whereas reflection strength and frequency vary with azimuth. The azimuthal effects on reflection coefficients and seismic wave velocities in an HTI medium are quantitatively analyzed. The resulting theory-based and real-world azimuth gathers demonstrate the anisotropic nature of such media. The fitting of the ellipse is used to quantitatively predict the direction and strength of anisotropy in the study area, which is consistent with that obtained by the S-wave splitting prediction method. In wide-azimuth data processing, measures are taken to eliminate the influence of azimuthal anisotropy, and the coherent spectrum pickup method is used to accurately calculate the azimuthal velocity of underground HTI media and perform azimuthal anisotropy correction processing, which eliminates the time difference between fast and slow wave caused by azimuthal anisotropy. The achieved results provide support for subsequent high-resolution imaging.
Seismic petrophysics is an important link between seismic elastic properties and reservoir physical properties. Based on the petrological and microstructure characteristics of shale in the Qingshankou formation of Sanzhao sag in the north of Songliao Basin, this paper presents an anisotropy petrophysical model with complex pore structure suitable for organic shale constructed with the use of the Voigt-Reuss-Hill average model, an anisotropy self-consistent approximation+differential effective medium model, and the layering of clay and kerogen is simulated by using the Voigt-Reuss-Hill average and bond transform to achieve the simulation of shale anisotropy. Based on the proposed model, the effects of the organic volume fraction, porosity, and pore aspect ratio on rock elastic properties are discussed. The result shows that with the increase of matrix porosity, all elastic parameters show a decreasing trend; with the increase of the organic volume fraction, except shear modulus, other elastic parameters show an increasing trend. Through comparative analysis, the elastic parameters (Lamé impedance and Shear impedance) sensitive to the organic volume fraction and porosity are optimized; the seismic petrophysical cross-plot template with core calibration is constructed. The application shows that the predicted S-wave velocity based on the proposed model is in good agreement with the S-wave velocity derived from dipole source logging. Combined with the high-precision prestack elastic parameter inversion, the “sweet spot” characteristics can be well described, and the research could contribute to a better “sweet spot” description and provide a better support for shale exploration in Sanzhao sag.
The accurate identification of seismic faults, which serve as crucial fluid migration pathways in hydrocarbon reservoirs, is of paramount importance for reservoir characterization. Traditional interpretation is inefficient. It also struggles with complex geometries, failing to meet the current exploration demands. Deep learning boosts fault identification significantly but struggles with edge accuracy and noise robustness. To overcome these limitations, this research introduces SwiftSeis-AWNet, a novel lightweight and high-precision network. The network is based on an optimized MedNeXt architecture for better fault edge detection. To address the noise from simple feature fusion, a Semantics and Detail Infusion (SDI) module is integrated. Since the Hadamard product in SDI can cause information loss, we engineer an Attention-Weighted Semantics and Detail Infusion (AWSDI) module that uses dynamic multi-scale feature fusion to preserve details. Validation on field seismic datasets from the Netherlands F3 and New Zealand Kerry blocks shows that SwiftSeis-AWNet mitigates challenges like the loss of small-scale fault features and misidentification of fault intersection zones, enhancing the accuracy and geological reliability of automated fault identification.
Quantitative microstructure evaluation of sedimentary rock thin sections is essential for revealing reservoir flow mechanisms and assessing reservoir quality. However, traditional manual identification is inefficient and prone to subjectivity. Although current deep learning approaches have improved efficiency, most remain confined to single tasks and lack a pathway to translate image recognition into quantifiable geological parameters. Moreover, these methods struggle with cross-scale feature extraction and accurate grain boundary localization in complex textures. To overcome these limitations, this study proposes a three-stage automated analysis framework integrating intelligent lithology identification, sandstone grain segmentation, and quantitative analysis of fabric parameters. To address scale discrepancies in lithology discrimination, Rock-PLionNet integrates a Partial-to-Whole Context Fusion (PWC-Fusion) module and the Lion optimizer, which mitigates cross-scale feature inconsistencies and enables accurate screening of target sandstone samples. Subsequently, to correct boundary deviations caused by low contrast and grain adhesion, the PetroSAM-CRF strategy integrates polarization-aware enhancement with dense conditional random field (DenseCRF)-based probabilistic refinement to extract precise grain contours. Based on these outputs, the framework automatically calculates key fabric parameters, including grain size and roundness. Experiments on 3290 original multi-source thin-section images show that Rock-PLionNet achieves a classification accuracy of 96.57% on the test set. Furthermore, PetroSAM-CRF reduces segmentation bias observed in general-purpose models under complex texture conditions, enabling accurate parameter estimation with a roundness error of 2.83%. Overall, this study presents an intelligent workflow linking microscopic image recognition with quantitative analysis of geological fabric parameters, providing a practical pathway for digital petrographic evaluation in hydrocarbon exploration.
Imaging logging serves as a critical technology for identifying and characterizing fractures in unconventional oil and gas reservoirs. Despite significant progress in deep learning for automated fracture recognition in this field, the integration of fracture interpretation with large language models remains insufficient. To address this, this paper constructs a Chinese fracture image–text pair dataset covering multiple scenarios and proposes “FracLogGPT”, a three-stage multimodal large language model with a parameter scale of approximately 7 billion. Using Qwen2.5-VL-7B as the baseline model, this study employs Domain-Adaptive pre-training (DAPT) to tailor the model to geological and logging contexts. Efficient Supervised Fine-Tuning (SFT) is achieved via the LoRA method, while output style alignment is accomplished through Direct Preference Optimization (DPO) combined with expert preference data. Experimental results on an independent test set show that FracLogGPT achieves a Count-F1 of 0.70 for fracture-count classification, with location and morphology consistency accuracies of 0.49 and 0.43, respectively, and higher text-level BLEU and ROUGE-L scores than larger, non-domain-adapted external models evaluated under the same conditions. Comparative experiments across stages validate the effectiveness of the proposed workflow. In summary, “FracLogGPT” achieves automated identification and expert-like description of imaging logging fractures with approximately 7 billion parameters, providing a reusable training pathway and evaluation workflow for intelligent imaging logging interpretation.