Homoepitaxial film and semi-insulating bulk β-Ga2O3 with (001) orientation were studied using terahertz time-domain spectroscopy (THz-TDS) in the frequency region from 0.2 to 3.0 THz parallel to the [100] and [010] directions. The static permittivity of the bulk was determined to be 10.0 and 10.4 along the -axis and -axis, respectively, and the refractive index values at 0.2 THz are 3.17 and 3.23 for each axis. The electrical resistivity of the epilayer was extracted with good accuracy by employing the Drude–Lorentz model and without the use of electrical contacts. This noninvasive and contact-free material evaluation through THz-TDS proves to be a powerful tool for probing and obtaining various types of information about β-Ga2O3 materials such as bulk and thin films for the development of β-Ga2O3-based device applications.
The habit of organic 4-dimethylamino-N-methyl-4-stilbazolium tosylate (DAST) crystals was successfully controlled by modifying their growth conditions. DAST solutions of different concentrations exhibited different aspect ratios (length/thickness). In addition, we measured the electrooptic (EO) sensitivity of DAST crystals using external EO probing to evaluate their crystallinity. The EO signal power obtained from the DAST crystals was proportional to crystal thickness. This result showed that the crystallinity of DAST crystals was maintained irrespective of their thicknesses. We also observed that the EO signal from DAST was about 30-fold larger than that of KTiOPO4 (KTP) with the same thickness.
We report third-harmonic generation (THG) at 355 nm in CsLiB6O10 (CLBO) by using sum-frequency mixing process. As a fundamental laser source, we employ a hybrid master oscillator power amplifier (MOPA) system seeded by a gain-switched laser diode (GS-LD) at 1064 nm to produce narrow spectral picosecond pulses. Both CLBO and walk-off compensated prism-coupled CLBO device generate over 30-W output of 355-nm UV lights, which means walk-off effect in CLBO is negligible in the picosecond laser system. The maximum THG conversion efficiency from the fundamental reaches about 48%, which is 1.2 times higher than that of LiB3O5 (LBO). Theoretical THG outputs with CLBO and LBO are numerically calculated in order to verify the validity of these experimental results in detail.
22 January 2007 in Molecular Crystals and Liquid Crystals
DAST (1-methyl-4-{2-[4-(dimethylamino)phenyl]ethenyl}pyridinium p-toluenesulfonate) is a promising crystalline material for electro-optic applications and THz-wave generation. DAST powder for crystal growth was prepared by two synthesis routes including the conventional one and we confirmed that purity of DAST powder became indistinguishable after proper recrystallization even using conventional synthesis process. The highest solubility of DAST was found for methanol-acetonitrile mixture, and DAST crystal growth in this mixture or methanol-ethanol mixture gave thicker crystals than those grown in methanol. Thus, morphological control of DAST single crystals was found to be possible by varying solvents.