We combined 71,930 short‐term (median duration 4 days) home radon test results with 1:24,000‐scale bedrock geologic map coverage of Kentucky to produce a statewide geologically based indoor‐radon potential map. The test results were positively skewed with a mean of 266 Bq/m3, median of 122 Bq/m3, and 75th percentile of 289 Bq/m3. We identified 106 formations with ≥10 test results. Analysis of results from 20 predominantly monolithologic formations showed indoor‐radon concentrations to be positively skewed on a formation‐by‐formation basis, with a proportional relationship between sample means and standard deviations. Limestone (median 170 Bq/m3) and dolostone (median 130 Bq/m3) tended to have higher indoor‐radon concentrations than siltstones and sandstones (median 67 Bq/m3) or unlithified surficial deposits (median 63 Bq/m3). Individual shales had median values ranging from 67 to 189 Bq/m3; the median value for all shale values was 85 Bq/m3. Percentages of values falling above the U.S. Environmental Protection Agency (EPA) action level of 148 Bq/m3 were sandstone and siltstone: 24%, unlithified clastic: 21%, dolostone: 46%, limestone: 55%, and shale: 34%. Mississippian limestones, Ordovician limestones, and Devonian black shales had the highest indoor‐radon potential values in Kentucky. Indoor‐radon test mean values for the selected formations were also weakly, but statistically significantly, correlated with mean aeroradiometric uranium concentrations. To produce a map useful to nonspecialists, we classified each of the 106 formations into five radon‐geologic classes on the basis of their 75th percentile radon concentrations. The statewide map is freely available through an interactive internet map service.
Pennsylvanian rocks are at the bedrock surface in the Illinois Basin, which covers most of central and southern Illinois, southwestern Indiana, and part of western Kentucky. The lower contact is a regional unconformity, incised into rocks ranging in age from Ordovician to Late Mississippian. Morrowan rocks are confined to the southeastern part of the basin, the bottoms of deep paleovalleys, and a small outlier at the northwest corner. Characteristic rocks are clean quartz sandstone (quartz arenite), siltstone, shale, lenticular coal, and rare limestone. Atokan rocks show a transition from quartz arenite to lithic arenite, and progressively wider depositional extent as valleys on the sub-Pennsylvanian surface were filled. Cyclic sedimentation became prominent during the Desmoinesian, with regionally extensive mineable coal seams and layers of marine limestone and black phosphatic shale. Similar patterns prevailed through Missourian and Virgilian time, except that coal beds are generally thinner and limestone beds thicker. Lower Permian rocks are confined to a small down-faulted outlier in Kentucky.
The middle Cambrian Maryville–Basal sands in the interval of 4600–4720 ft (1402.1–1438.7 m) in the Kentucky Geological Survey 1 Hanson Aggregates well (i.e., muddy sandstones separated by sandy mudstones) were evaluated to determine effective porosity (ϕe), clay volume (Vc), and supercritical CO2 storage capacity. Average porosity and permeability measured in core plugs were 8.71% porosity and 2.17 md permeability in the Maryville sand and 10.61% porosity and 15.79 md permeability in the Basal sand. The ϕe and Vc were calculated from the density log using a multiple-matrix shaly sand model to identify four formation lithologies: muddy sandstone, sandy mudstone, dolomitic mudstone, and dolomitic claystone. Average ϕe and Vc calculated in the Maryville sand were 8.9% and 35.3%, respectively, and an average of 8.7% and 41.2% in the Basal sand, respectively. Calculated ϕe exhibits a good match with porosity measured in core plugs. Prior to step-rate testing, static reservoir pressure was 2020 psi (13.9 MPa), representing a 0.435 psi/ft (9.8 kPa/m) hydrostatic gradient, which is consistent with other underpressured reservoirs in Kentucky. The interval fractured at 2698 psi (18.0 MPa), yielding a fracture gradient of 0.581 psi/ft (12.7 kPa/m). Pressure falloff analysis suggests a dual-porosity/dual-permeability reservoir consistent with core data. Estimated 50th percentile supercritical CO2 storage volume supercritical CO2 storage volume, using 7% porosity cutoff for determining net reservoir volume, is 0.538 tons/ac (1.33 t/ha). Thin reservoir sands, low porosity and permeability, and low fracture gradient, however, preclude the Maryville–Basal sands as large-volume deep-saline CO2 storage reservoirs in this area.