Carl Budtz-Jørgensen

Carl Budtz-Jørgensen

Auto-generated profile, based on publicly available information

Carl Budtz-Jørgensen

DTU Space, Technical University of Denmark, Kongens Lyngby, Denmark

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 January 2020 in Science
Verified
Journal Article
Closed access
PDF file
TNTorsten Neubert
Torsten Neubert
NØNikolai Østgaard
Nikolai Østgaard
VRVictor Reglero
Victor Reglero
OCOlivier Chanrion
Olivier Chanrion
MHMatthias Heumesser
Matthias Heumesser
CEChris J. Eyles
Chris J. Eyles
Gamma-ray flash from a lightning leader: Terrestrial gamma-ray flashes (TGFs) are millisecond pulses of gamma rays produced by thunderstorms. Neubert et al. observed a TGF from above, using instruments on the International Space Station. High-speed photometry in optical, ultraviolet, x-ray, and gamma-ray bands allowed them to determine the sequence of events that produced the TGF. Emission from an intracloud lightning leader was followed within a millisecond by the TGF. The subsequent lightning flash produced an electromagnetic pulse, which induced expanding waves of ultraviolet emission in the ionosphere above the thunderstorm, called an elve. The authors conclude that high electric fields produced within the lightning leader generated the TGF. Science , this issue p. 183

22 December 2021 in Nature
Verified
Journal Article
Closed access
PDF file
ACAlberto J. Castro-Tirado
Alberto J. Castro-Tirado
NØN. Østgaard
N. Østgaard
EGE. Göǧüş
E. Göǧüş
MSM. Carmen Sánchez-Gil
M. Carmen Sánchez-Gil
JPJ. Pascual-Granado
J. Pascual-Granado
SYS. Yang
S. Yang

22 June 2021 in Experimental Astronomy
Verified
Journal Article
Open access
PDF file
FFFilippo Frontera
Filippo Frontera
EVEnrico Virgilli
Enrico Virgilli
Cristiano GuidorziCristiano Guidorzi
Cristiano Guidorzi
PRP. Rosati
P. Rosati
RDRoland Diehl
Roland Diehl
MVM. Della Valle
M. Della Valle
Nuclear astrophysics, and particularly nuclear emission line diagnostics from a variety of cosmic sites, has remained one of the least developed fields in experimental astronomy, despite its central role in addressing a number of outstanding questions in modern astrophysics. Radioactive isotopes are co-produced with stable isotopes in the fusion reactions of nucleosynthesis in supernova explosions and other violent events, such as neutron star mergers. The origin of the 511 keV positron annihilation line observed in the direction of the Galactic Center is a 50-year-long mystery. In fact, we still do not understand whether its diffuse large-scale emission is entirely due to a population of discrete sources, which are unresolved with current poor angular resolution instruments at these energies, or whether dark matter annihilation could contribute to it. From the results obtained in the pioneering decades of this experimentally-challenging window, it has become clear that some of the most pressing issues in high-energy astrophysics and astro-particle physics would greatly benefit from significant progress in the observational capabilities in the keV-to-MeV energy band. Current instrumentation is in fact not sensitive enough to detect radioactive and annihilation lines from a wide variety of phenomena in our and nearby galaxies, let alone study the spatial distribution of their emission. In this White Paper (WP), we discuss how unprecedented studies in this field will become possible with a new low-energy gamma-ray space experiment, called ASTENA (Advanced Surveyor of Transient Events and Nuclear Astrophysics), which combines new imaging, spectroscopic and polarization capabilities. In a separate WP (Guidorzi et al. 39), we discuss how the same mission concept will enable new groundbreaking studies of the physics of Gamma–Ray Bursts and other high-energy transient phenomena over the next decades.

24 April 2017 in IEEE Transactions on Nuclear Science
Verified
Journal Article
Closed access
CBCarl Budtz-Jorgensen
Carl Budtz-Jorgensen
IKIrfan Kuvvetli
Irfan Kuvvetli
The 3D position sensitive CZT detector for high energy astrophysics developed at DTU has been investigated with a digitizer readout system. The 3D CZT detector is based on the CZT Drift Strip detector principle and was fabricated using a REDLEN CZT crystal (20 mm x 20 mm x 5 mm). The detector contain 12 drift cells, each comprising one collecting anode strip with 4 drift strips, biased such that the electrons are focused and collected by the anode strips. 3D position determination is achieved using the anode strip signals, the drift strip signals and the signals from 10 cathode strips. For the characterisation work, we used a DAQ system with a 16 channels 250 MHz 14bit digitizer, SIS3316. It allowed us to analyse the pulse shapes of the signals from 4 detector cells at a time. The 3D CZT setup was characterized with a finely collimated radioactive source of 137Cs at 662 keV. The analysis required development of novel position determination algorithms which are the subject of this paper. Using the digitizer readout we demonstrate improved position determination compared to the previous read out system based on analog electronics. Position resolutions of 0.4 mm FWHM in the X-, Y- and Z-directions were achieved and the energy resolution was 7.2 keV FWHM at 662 keV. The timing information allows identification of multiple interaction events within one detector cell, e.g. Compton scattering followed by photoelectric absorption. These characteristics are very important for a high energy spectral-imager suitable for use in advanced Compton telescopes, or as focal detector for new hard X –ray and soft gamma-ray focusing telescopes or in polarimeter instrumentation. CZT detectors are attractive for these applications since they offer relatively high quantum efficiency. From a technical point of view it is advantageous that their cooling requirements are modest.

22 March 2021 in IEEE Transactions on Nuclear Science
Verified
Journal Article
Closed access
SOS. Howalt Owe
S. Howalt Owe
IKI. Kuvvetli
I. Kuvvetli
CBC. Budtz-Jorgensen
C. Budtz-Jorgensen
At DTU Space, a 3-D CdZnTe (CZT) drift strip detector prototype of size 20 mm $\times4.7$ mm $\times20$ mm has been developed. It has demonstrated excellent submillimeter position resolution (<0.5mm) and energy resolution (<1.6%) at 661.6 keV using pulse shape signal processing. Signal formation on each of the 26 electrode readouts uses bipolar charge-sensitive preamplifiers. The output is sampled using high-speed digitizers, providing us with the full pulse shapes generated by each interaction in the detector. In order to optimize and understand the detector performance, a model of the 3-D CZT drift strip detector has been developed using COMSOL Multiphysics and Python. It simulates the 26 pulse shapes generated by an interaction and provides an output similar to that of the real detector setup. In order to create a trustworthy model, the material properties of the detector must be well understood. The generated pulse shapes are greatly affected by the electron mobility ( $\boldsymbol \mu _{e}$ ) and lifetime ( $\boldsymbol \tau _{e}$ ) of the detector material. Therefore, 3-D maps of $\boldsymbol \mu _{e}$ and $\boldsymbol \tau _{e}$ have been calculated as look-up tables for the model, utilizing the high-resolution 3-D interaction position and energy information provided by the 3-D CZT drift strip detector. In conclusion, the model performance is compared to real event data. We show that the model performance is greatly improved using the newly calculated 3-D maps compared to the uniform material properties provided by the crystal manufacturer.

18 August 2009 in IEEE Transactions on Nuclear Science
Verified
Journal Article
Closed access
CBCarl Budtz-Jorgensen
Carl Budtz-Jorgensen
IKIrfan Kuvvetli
Irfan Kuvvetli
YSYngve Skogseide
Yngve Skogseide
KUKjetil Ullaland
Kjetil Ullaland
NONikolai Ostgaard
Nikolai Ostgaard
The National Space Institute, of the Technical University of Denmark is responsible for the selection and characterization of the CZT detector crystals for the X- and Gamma-ray instrument, MXGS, onboard ESA's Atmospheric Space Interaction Monitor (ASIM) mission. The first CZT pixel detector modules for MXGS have recently been delivered by Redlen. Measurements at the University of Bergen demonstrate that the detectors exhibit the expected spectral performance; however, it was also found that the detector modules showed unexplained pixel-to-pixel count rate variations. At The National Space Institute a series of measurements were initiated focusing on the pixel-to-pixel count rate variations. Collimated monochromatic X-ray beams were used to scan a number of Redlen pixel detectors. The main conclusion of these measurements is that the pixel-to-pixel count rate variations are correlated with variations in the effective pixel areas. These variations are likely related to non-uniformity of the internal electric detector field.