The combination of the extraction during pumping (EDP) amplification scheme and the thin disk (TD) technology has been successfully applied to the Ti:sapphire (Ti:sa) laser medium for the first time, to the best of our knowledge. In a proof-of-principle experiment, we demonstrate high energy broadband amplification in a room temperature water cooled EDP-TD head of stretched femtosecond pulses at a 10 Hz repetition rate, instead of performing a cryogenically cooled traditional multi-pass scheme. Hence, the EDP-TD combination can overcome the limits associated with thermal effects and transverse amplified spontaneous emission, enabling Ti:sa laser systems to have a petawatt peak and hundreds of watts of average power.
Recompressed pulses from Ti:sapphire chirped-pulse lasers are accompanied by a slowly decaying post-pulse pedestal that is coherent with the main pulse. The pedestal typically consists of numerous pulses with temporal separation in the picosecond range. The source of this artifact lies in the Ti:sapphire active medium itself, both in the Kerr-lens mode-locked oscillator and in subsequent amplifiers. In the presence of substantial self-phase modulation, after recompression the post-pedestal generates a mirror-symmetric pre-pulse pedestal. This pedestal severely degrades the leading edge of the output pulse. This degradation is far more limiting than the original post-pedestal and severely lowers the achievable temporal contrast.
Advancing ultrafast high-repetition-rate lasers to shortest pulse durations comprising only a few optical cycles while pushing their energy into the multi-millijoule regime opens a route toward terawatt-class peak powers at unprecedented average power. We explore this route via efficient post-compression of high-energy 1.2 ps pulses from an ytterbium InnoSlab laser to 9.6 fs duration using gas-filled multi-pass cells (MPCs) at a repetition rate of 1 kHz. Employing dual-stage compression with a second MPC stage supporting a close-to-octave-spanning bandwidth enabled by dispersion-matched dielectric mirrors, a record compression factor of 125 is reached at 70% overall efficiency, delivering 6.7 mJ pulses with a peak power of ∼0.3 TW. Moreover, we show that post-compression can improve the temporal contrast at multi-picosecond delay by at least one order of magnitude. Our results demonstrate efficient conversion of multi-millijoule picosecond lasers to high-peak-power few-cycle sources, prospectively opening up new parameter regimes for laser plasma physics, high energy physics, biomedicine, and attosecond science.
We report on the simultaneous temporal filtering and compression of 30 fs laser pulses down to 5 fs duration via nonlinear elliptical polarization rotation (NER) in a stretched flexible hollow fibre compressor. Both the achieved 2-cycle pulse duration and the internal conversion efficiency of ∼47% are solely limited by the applied fibre geometry. Our investigations show that precise control of the NER process could help significantly improve the temporal fidelity of high-energy hollow fibre compression schemes.
Combining high peak power and high average power has long been a key challenge of ultrafast laser technology, crucial for applications such as laser-plasma acceleration and strong-field physics. A promising solution lies in post-compressed ytterbium lasers, but scaling these to high pulse energies presents a major bottleneck. Post-compression techniques, particularly Herriott-type multi-pass cells (MPCs), have enabled large peak power boosts at high average powers but their pulse energy acceptance reaches practical limits defined by setup size and coating damage threshold. In this work, we address this challenge and demonstrate, to our knowledge, a novel type of compact, energy-scalable MPC (CMPC). By employing a novel MPC configuration and folding the beam path, the CMPC introduces a new degree of freedom for downsizing the setup length, enabling compact setups even for large pulse energies. We experimentally and numerically verify the CMPC approach, demonstrating post-compression of 8 mJ pulses from 1 ps down to 51 fs in atmospheric air using a cell roughly 45 cm in length at low fluence values. Additionally, we discuss the potential for energy scaling up to 200 mJ with a setup size reaching 2.5 m. Our work presents a new approach to high-energy post-compression, with up-scaling potential far beyond the demonstrated parameters. This opens new routes for achieving the high peak and average powers necessary for demanding applications of ultrafast lasers.
19 August 2019 in Journal of the Optical Society of America B