24 February 2020 in IEEE Transactions on Power Systems
A distributed and asynchronous active fault management (DA-AFM) method is developed to manage networked microgrids' (NMs) performance under balanced or unbalanced grid faults. The DA-AFM aims to (1) enable NMs' fast fault ride-through capabilities, (2) limit the total fault contributions by coordinating heterogeneous microgrids in the NM system, and (3) deploy software-defined networks (SDN) to ensure highly resilient AFM. The problem is formulated in an optimization form that can incorporate various fault management objectives and constraints in a programmable and flexible fashion. The scalability and resiliency of the DA-AFM system are guaranteed by adopting an SDN-enabled distributed and asynchronous surrogate Lagrangian relaxation (DA-SLR) algorithm, which avoids single point of failure, preserves privacy, and eliminates the idle waiting of other subproblems. Case studies are performed on a six-microgrid NM system to validate the effectiveness and efficacy of DA-AFM. Testing results show that DA-AFM has excellent convergence performance, supports plug-and-play, is resilient to communication delay and failures, meets real-time requirements and is scalable.
14 June 2021 in IEEE Transactions on Power Systems
This letter devises a generalized eigenanalysis methodology for time-delayed networked microgrids (NMs) incorporating heterogeneous delays. The main contributions include: 1) it devises a universal delayed dynamic model for NMs under distributed control; 2) it quantifies the impacts of heterogeneous delays on NMs stability through an ODE-SOD-based eigensolver; 3) it offers insights into the effects of cyber and physical interconnections on NMs’ stability performance. The efficiency and efficacy of the delayed eigananalysis are thoroughly validated on our high-fidelity, real-time RTDS models for NMs.
15 June 2022 in Electric Power Systems Research
1 June 2021 in Journal of Physics: Conference Series
High manganese steel was prepared by adjusting the components of the alloys by adding V-Ti. The investigation was carried out to study the effect of V-Ti elements alloying on the microstructure and wear properties of high manganese steel through metallographic microscope, scanning electron microscopy, mechanical machine and abrasive wear tests. The test results showed that V-Ti alloying improved the properties of high manganese steel. The grains are refined, size of impurities are reduced, the form and distribution of impurities are also ameliorated. In addition, the hardness was increased by 23.7%~84.6% and tensile strength can be increased up to 31.3%.
6 August 2018 in IEEE Transactions on Nanotechnology
Mechanical properties, such as flexural rigidity and elastic modulus, are important factors deciding how pollen tubes penetrate and navigate inside flowers' styles and finally into ovules. As the ratio of pollen tubes' length to diameter can be far more than several thousand, bending pollen tubes is an effective method to measure their mechanical properties. However, current techniques, such as microfluidic system, can only bend pollen tubes from one fixed direction. With regard to pollen tubes' irregular shapes and ununiform properties, properties achieved from pollen tubes' one direction cannot reflect properties of other directions. Herein, this paper proposes a rotary nanorobotic system that can rotate pollen tubes and thus pollen tubes can be bent and measured from multi-direction, instead of one fixed direction. Experiment results indicate that flexural rigidity of pollen tubes vary as much as fifteen times at different directions. This nanorobot based characterization system could provide us the quantitative data from multi-direction, which gives new opportunities for the in-depth understanding of the mechanism of pollen-tube guidance inside pistil.