22 February 2012 in Dalton Transactions
In this contribution, we synthesized water-soluble Fe3O4 nanoparticles (NPs) with sufficiently high solubility (28 mg mL−1) and stability (at least one month) through a hydrothermal approach, and found that they exhibited excellent removal ability for heavy-metal ions from waste water. For the first time, the water-soluble Fe3O4 NPs were used as adsorbents for heavy-metals removal from wastewater. It is noteworthy that the adsorption ability of the water-soluble Fe3O4 NPs for Pb2+ and Cr6+ is stronger than water-insoluble Fe3O4 NPs. Furthermore, the water-soluble Fe3O4 NPs exhibited relatively high saturation magnetization (83.4 emu g−1), which allowed their highly-efficient magnetic separation from wastewater. The most important thing is that the water-soluble magnetite as an adsorbent can directly dissolve in water without the help of mechanical stirring or any extraneous forces, which may solve a key problem for the practical application of magnetic powders in the field of sewage purification. Moreover, the water-soluble Fe3O4 NPs show a highly-efficient adsorption capacity for 10 ppm of Pb2+ ions solution which can reach 90% within 2 minutes.
4 November 2016 in Journal of Materials Chemistry A
Ultrathin Co 3 S 4 /CoMo 2 S 4 nanosheets vertically aligned on rGO sheets are prepared through a facile one-step hydrothermal method for supercapacitors.
23 May 2016 in Journal of Materials Chemistry A
The unique octahedral CoFe/CoFe2O4 submicron magnetic composite, used as a Fenton-like catalyst, exhibits superior perxoymonosulfat (PMS) activity for the degradation of organic pollutants at nearly neutral pH and room temperature.
23 December 2016 in Journal of Materials Chemistry A
A Co-doped Ni(OH)2/Ni3S2 hybrid was grown in situ on Ni foam (NiCo-10) via a one-pot hydrothermal reaction with two-step temperature control.
16 May 2016 in Journal of Materials Chemistry A
In our work, ultra-thin Ni/Co hydroxides (Ni1Co2) with a sheet-like structure are successfully grown on the surface of conductive nickel foam via a one-pot hydrothermal reaction, avoiding the need for binders and conducting agents. In the reaction, NO3 − ions from reactants release OH− ions partially with Co2+ ions turning into Co3+ ions and then OH− ions can react with Ni2+, Co2+ or Co3+ in a mixed solvent of water and ethanol, without the necessary addition of an extra alkali source. When used for supercapacitors, the resulting free-standing Ni1Co2 composites exhibit an impressive specific capacitance of 2654.9 F g−1 at a current density of 1 A g−1 and a favorable cycling stability with 77% retention even at a high current density of 10 A g−1 after 1500 cycles. In order to do research into the electrochemical properties of Ni1Co2 composites, a simple asymmetric supercapacitor (ASC) is constructed, using the Ni1Co2 nanosheets as the positive electrode and activated carbon (AC) as the negative electrode. This ASC with an extended voltage window of 0–1.6 V presents an outstanding energy density of 42.4 W h kg−1 (at a power density of 823.2 W kg−1) and still retains 24.8 W h kg−1 (at 10 170.8 W kg−1). Meanwhile, the excellent cycling stability of this ASC device has been revealed via a great specific capacitance retention of 94% after 3000 cycles (at a current density of 5 A g−1). So the Ni1Co2-based composites could be one of the potential materials for high-performance energy storage.