16 May 2018 in IEEE Transactions on Robotics
This paper presents a method for designing the gait of a snake robot that moves in a complicated environment. We propose a method for expressing the target form of a snake robot by connecting curve segments whose curvature and torsion are already known. Because the characteristics of each combined shape are clear, we can design the target form intuitively and approximate a snake robot configuration to this form with low computational cost. In addition, we propose two novel gaits for the snake robot as a design example of the proposed method. The first gait is aimed at moving over a flange on a pipe, while the other is the crawler gait aimed at moving over rough terrain. We demonstrated the effectiveness of the two gaits on a pipe and rough terrain in experiments.
20 July 2022 in IEEE Transactions on Robotics
The snake robot, which mimics the mechanism of real snakes, is expected to be used in various environments. This article addresses the challenge of snake robots autonomously adapting to and moving inside and outside pipes having complex shapes using a helical rolling motion. We consider that an irregular helical form can be defined as a combination of three components, namely the axis, cross-sectional shape, and pitch angle, and that it is easier to consider deformations that have compliance only in a specific direction. Our proposed method deforms the cross-sectional shape of the snake robot locally so that it adopts the shape of the pipe accurately. Experiments were conducted using our developed snake robot to verify the effectiveness of the proposed method, and it was demonstrated that the proposed method can be used for a snake robot moving inside and outside of straight pipes and outdoor tree, including those having noncircular and varying cross sections.
26 March 2021 in IEEE Transactions on Robotics
A snake robot performs diverse motions. To realize a wide range functions in a complex environment, it is necessary to transition between various motions suited to each environment. In this article, we propose a method of transitioning the motion of a snake robot across different environments to expand the application environment of the robot. We first find that the motion at the connection point between two motions must coincide with the tangential movement during motion transition across different environments. We then design a gait called the circular pedal wave. This circular pedal wave allows a hoop-passing motion in which the whole body moves as if it is passing through a virtual hoop fixed in space in sequence from its head through combination with a proposed shift part. The hoop-passing motion allows motion transition across different environments. We propose three application examples of this hoop-passing motion, namely passing through a hole in a wall, entering an underfloor, and attaching to a ladder. We report on experiments conducted to verify the effectiveness of the proposed method and to realize the described motions.
28 July 2022 in IEEE Robotics and Automation Letters
A non-wheeled snake robot can propel itself by pushing against obstacles. This is called obstacle-aided locomotion. To expand the exploration range of a snake robot using this method, it is preferable to utilize obstacles that are both on the ground and by the side or above. To achieve these goals, we propose an obstacle-aided locomotion using piecewise helixes. This target shape comprises grounding and obstacle-contacting parts. The length and shape of the grounding part can be changed from a straight line to a circular arc. The height of the obstacle-contacting part can be changed or its direction can be reversed. The robot can adapt to various obstacles by appropriately changing its body shape. In addition, we propose a snake robot locomotion in a flat ground using the same shape as that used for obstacle-aided locomotion. This involves a combination of shift control and rolling motion. The robot can move in a straight line in the forward or lateral direction or can turn in a circular arc using the proposed method. Finally, experiments that confirm the effectiveness of the proposed method are presented.
7 October 2021 in IEEE/ASME Transactions on Mechatronics
Snake robots have shown limited ability to perform manipulation tasks in comparison to their locomotion capabilities. In this article, we propose a mobile manipulation approach that increases the manipulation ability of snake robots by using their full-body motion. We consider a snake robot that moves along the outer surface of a pipe using the helical rolling gait. To perform a manipulation task, we extend the front links of the robot to form a manipulator-part, where the remaining links form a helical base that wraps around the pipe. In the proposed approach, the motion of the manipulator-part is combined with a rolling motion performed by the base-part. This results in enhanced rotational ability of the end-effector, without the need to install an additional rotary motor. The stability of the robot structure is also improved via the resulting tightening force between the helical base-part and the pipe. The kinematics of the proposed robot arrangement is represented considering a dynamically changing contact point between the links of the helical base and the pipe. To realize the proposed method, we introduce a two-level controller that enables the manipulator-part and the helical base to work simultaneously during manipulation. The experimental results showed the validity of the proposed method to track various trajectories and carry out manipulation tasks using a typical snake robot without extra actuators.
6 December 2019 in Advanced Robotics
Robots are needed in rescue activities and the inspection of infrastructure. We developed the rescue robot FUHGA2 so that it has various functions. FUHGA2 has high mobility, with main crawlers covering the body and four sub-crawlers, high dexterity using a long six-axis arm, and high searching ability using various sensors. Furthermore, a novel parallel gripper unit with wire-jamming mechanism is mounted at the tip of the arm, which can change its hardness and fit its shape to an object. Additionally, high Maneuvering is achieved by displaying sensor information to the operator clearly and intuitive operation command design. FUHGA2 won the World Robot Summit 2018 Standard Disaster Robotics Challenge, which is a competition for rescue robots. We achieved high scores in all categories of tasks. In this paper, we describe the development of FUHGA2 and the performance evaluation results from the World Robot Summit 2018.