There has been enormous demand for detecting trace concentrations of chemical molecules and in particular low-volatile explosives through electronic instrumentation, which however, still faces significant shortcomings in both detectability and selectivity to date. In this work, we propose a novel sensor strategy that incorporates arrays of atomically-thin-body field-effect sensors for highly-scalable, ultra-sensitive trace explosive sensors with fast response to ultra-low analyte concentrations. Sensor performance and functionalization are theoretically simulated through system-level considerations using various kinetic, electrostatic, quantum mechanics, and drift-diffusion models. Moreover, by implementing custom-built neural network models for pattern recognition, we successfully achieved automatic, accurate detection of four different types of analytes with concentrations down to 0.02 part per trillion. The intelligent sensors have the capability to differentiate analyte types with 100% accuracy and predict the concentration values with ~10% of relative error simultaneously. We envision the proposed sensor platform, design metrics, deep learning methods and the combination of these innovations will be a promising yet practical solution towards ultra-sensitive trace explosive detection and can be extended to a wide range of molecular sensing applications.
Flexible DC system has increasingly been used in collecting PV units, boosting and integration because of its high effectiveness, less cost. The DC boosting and integration system has complex topology with great distributed capacitance, which will result in oscillation, rapidity of rising current, and difficulty of fault section identification. Thus, the protection with fast operating speed is required, which should be based on the instantaneous value of fault current. The effective fault information derived in such a short period of time from distorted transient instantaneous current data cannot avoid the disturbance of transient capacitance current. Considering these, conventional protection carries great potential for disoperation, therefore, a novel protection is proposed. The faulty section is correctly distinguished under the influence of transient capacitance currents by identifying the system response through Prony fitting, considering the fault as an excitation. Simulation results reveal that the proposed protection can accurately operate within 2 ms.
Xinjiang Kurgan Water Conservancy Project Construction Administration in order to implement the water and soil conservation plan, strengthen the design and construction management of water and soil conservation, optimize the prevention and control measures of water and soil loss, and coordinate the progress of the water and soil conservation project and the construction of the main project; timely and accurately grasp the project soil erosion status and prevention effect, put forward soil and water conservation improvement measures, reduce man-made soil and water loss; to find out major soil erosion hazards in time and put forward countermeasures and suggestions on soil erosion prevention and control; to provide the technical basis of water and soil conservation supervision and management and the basic information of public supervision, to promote the effective protection and timely recovery of the ecological environment in the project area, Yellow River Institute of Hydraulic Research was specially entrusted to carry out the water and soil conservation monitoring work of the project.