Background: Low-dose aspirin (ASP) is prescribed to millions of people around the world as a secondary preventative strategy for the majority of significant cardiovascular events; however, it carries a substantial risk of gastric ulcer and bleeding. Cabpirin® tablets, which include low-dose ASP and vonoprazan fumarate (VON), are approved in Japan for the treatment of acid-related diseases in patients who require a low dose of ASP but are at risk of ASP-associated gastric ulcers.Objective: This paper describes the first published quantitative analytical approaches for the determination of ASP and VON.Method: The normal ultraviolet absorption spectra of ASP and vonoprazan overlap significantly. The ratio spectra of the studied drugs were created and manipulated by ratio difference (RD) and first derivative of ratio spectra approaches. In the RD approach, the differences in the amplitude values between 229 and 283 nm enabled the quantitative analysis of ASP, and the differences in the amplitude values between 255 and 212 nm enabled the quantitative analysis of vonoprazan. In the first derivative of the ratio spectra approach, the created ratio spectra of each drug were transformed to the first-order derivative. ASP could be determined selectively at 237.40 nm without interference from vonoprazan. Moreover, vonoprazan could be determined selectively at 244 nm without interference from ASP.Results: The applied approaches were validated according to the ICH guideline, with good results. Linear correlations were obtained for ASP and vonoprazan over concentration ranges of 2–25 and 1–10 µg/mL, respectively.Conclusions: The described methods were optimized, validated, and applied for determination of the studied drugs in the synthetic mixtures and in pharmaceutical tablets without interferences.Highlights: Two spectrophotometric ratio spectra manipulating approaches were developed for the determination of the ASP and vonoprazan in their pharmaceutical combination tablets.
Favipiravir and remdesivir have been included in the COVID-19 treatment guidelines panel of several countries. The main objective of the current work is to develop the first validated green spectrophotometric methods for the determination of favipiravir and remdesivir in spiked human plasma. The UV absorption spectra of favipiravir and remdesivir have shown some overlap, making simultaneous determination difficult. Due to the considerable overlap, two ratio spectra manipulating spectrophotometric methods, namely, ratio difference and the first derivative of ratio spectra, enabled the determination of favipiravir and remdesivir in their pure forms and spiked plasma. The ratio spectra of favipiravir and remdesivir were derived by dividing the spectra of each drug by the suitable spectrum of another drug as a divisor to get the ratio spectra. Favipiravir was determined by calculating the difference between 222 and 256 nm of the derived ratio spectra, while calculating the difference between 247 and 271 nm of the derived ratio spectra enabled the determination of remdesivir. Moreover, the ratio spectra of every drug were transformed to the first order derivative using ∆λ = 4 and a scaling factor of 100. The first-order derivative amplitude values at 228 and 251.20 nm enabled the determination of favipiravir and remdesivir, respectively. Regarding the pharmacokinetic profile of favipiravir (Cmax 4.43 µg/mL) and remdesivir (Cmax 3027 ng/mL), the proposed methods have been successfully applied to the spectrophotometric determination of favipiravir and remdesivir in plasma matrix. Additionally, the greenness of the described methods was evaluated using three metrics systems: the national environmental method index, the analytical eco-scale, and the analytical greenness metric. The results demonstrated that the described models were in accordance with the environmental characteristics.
Entadfi™ is a recently FDA approved pharmaceutical combination capsule of finasteride and tadalafil. It was prescribed for the treatment of urinary tract disorders caused by benign prostatic hyperplasia in men. This paper introduced the first spectrophotometric methods for simultaneous determination of finasteride and tadalafil in the pure form and in the pharmaceutical capsules. UV absorption spectra of finasteride and tadalafil exhibited overlap hindered the direct simultaneous determination of the cited drugs. The UV absorption spectra of finasteride and tadalafil were transformed to the second order derivative. Finasteride could be determined selectively at 230.80 nm without interference from tadalafil. Moreover, tadalafil could be determined selectively at 292 nm without interference from finasteride. The ratio spectra of the studied drugs were derived and the derived ratio spectra of each drug were transformed to the first order derivative. Finasteride could be determined selectively at 218.80 nm without interference from tadalafil. Moreover, tadalafil could be determined selectively at 289.60 nm without interference from finasteride. The methods showed linearity with an excellent correlation coefficient in the concentration range of 10–140 µg/mL for finasteride and 3–40 µg/mL for tadalafil. The methods were validated following ICH guidelines for accuracy, precision, robustness, limit of detection, limit of quantification, and selectivity. The methods were found to be sensitive with LOD values for finasteride and tadalafil of 2.406 µg/mL and 0.876 µg/mL using the second derivative with zero crossing method and 2.229 µg/mL and 0.815 µg/mL using the first derivative of ratio spectra method. The methods were successfully applied for the determination of the studied drugs in their laboratory prepared mixtures, with mean percent recovery for finasteride and tadalafil of 99.37% and 99.17% using the second derivative with zero crossing method and 99.74% and 99.56% using the first derivative of ratio spectra method. Furthermore, the described methods were successfully applied for determination of the studied drugs in Entadfi™ capsules without interference from excipients. Based on the proposed results, the described methods could be utilized as simple method for the quality control of the studied drugs.
The environmentally friendly design of analytical methods is gaining interest in pharmaceutical analysis to reduce hazardous environmental impacts and improve safety and health conditions for analysts. The adaptation and integration of chemometrics in the development of environmentally friendly analytical methods is strongly recommended in the hope of promising benefits. Favipiravir and remdesivir have been included in the COVID-19 treatment guidelines panel of several countries. The main objective of this work is to develop green, tuned spectrophotometric methods based on chemometric based models for the determination of favipiravir and remdesivir in spiked human plasma. The UV absorption spectra of favipiravir and remdesivir has shown overlap to some extent, making simultaneous determination difficult. Three advanced chemometric models, classical least squares, principal component regression, and partial least squares, have been developed to provide resolution and spectrophotometric determination of the drugs under study. A five-level, two-factor experimental design has been used to create the described models. The spectrally recorded data of favipiravir and remdesivir has been reviewed. The noise region has been neglected as it has a negative impact on the significant data. On the other hand, the other spectral data provided relevant information about the investigated drugs. A comprehensive evaluation and interpretation of the results of the described models and a statistical comparison with accepted values have been considered. The proposed models have been successfully applied to the spectrophotometric determination of favipiravir and remdesivir in pharmaceutical form spiked human plasma. In addition, the environmental friendliness of the described models was evaluated using the analytical eco-scale, the green analytical procedure index and the AGREE evaluation method. The results showed the compliance of the described models with the environmental characteristics.
20 December 2022 in Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy
Remdesivir and apixaban have been included in the treatment guidelines of several countries for severe COVID-19 infections. To date, no analytical method has been developed for the determination of remdesivir and apixaban in plasma matrix. The main objective of this work was to develop a highly sensitive, green-adapted spectrofluorometric method for the determination of remdesivir and apixaban at the Nanoscale. Remdesivir and apixaban showed overlapping fluorescence emission spectra at 403 nm and 456 nm when excited at 246 nm and 285 nm, respectively. This overlap was resolved in two steps. The first step was synchronous fluorescence scanning of remdesivir and apixaban, and the second step was manipulation of the second-order derivative for the obtained spectra. These steps allowed complete resolution of the overlapping fluorescence spectra and selective determination of remdesivir and apixaban at 410 and 469 nm, respectively. The variables affecting the synchronous scanning of the aforementioned drugs were optimized in terms of sensitivity parameters and principles of green analytical chemistry. The described method allowed sensitive determination of remdesivir and apixaban over the concentration range of 5-200 ng/mL and 50-3000 ng/mL, respectively. The described method was validated and successfully applied for the simultaneous determination of the mentioned drugs in pure form and in spiked human plasma.
Background: Pain is a global, complex health problem that includes physical, emotional, and social components. The pain management process has many goals, including patient satisfaction, reducing clinical complications, and lowering costs. The physician describes pain medications in terms of the proven cause and classification of the severity of the pain. The combination of celecoxib and tramadol was recently approved by the Food and Drug Administration (FDA) in October 2021 for the treatment of acute pain in adults. Objective: This paper presents the first published quantitative analytical methods for celecoxib and tramadol. Methods: The UV absorption spectra of celecoxib and tramadol showed strong overlap. Mathematical simultaneous equation and ratio difference methods were developed to resolve the spectral overlap and quantify the drugs in the combination mixture. In the simultaneous equation method, the absorbance and absorptivity values at 252 and 217 nm were used to construct two mathematical equations that were used for the simultaneous mathematical quantification of the above drugs. The mathematical manipulation of the ratio difference based on the calculation of the differences in the amplitude values between 250 and 280 nm enabled the quantitative analysis of celecoxib, and the differences in the amplitude values between 221 and 272 nm enabled the quantitative analysis of tramadol. Results: The proposed methods were successfully applied to the selective quantitative analysis of celecoxib and tramadol in the synthetic mixtures and in the pharmaceutical tablets without interference from the tablet additives. Conclusions: The applied methods demonstrated good linearity in the concentration range of 1–20 µg/mL and 3–45 µg/mL for celecoxib and tramadol, respectively, with acceptable accuracy and precision. The methods were found to be sensitive with LOD values of 0.183 µg/mL and 0.626 µg/mL for celecoxib and tramadol, respectively, in simultaneous equation method and of 0.275 µg/mL and 0.772 µg/mL for celecoxib and tramadol, respectively, in ratio difference method. Highlights: The first established simple and validated UV spectrophotometric methods were described for concurrent quantification of the celecoxib and tramadol in their recently approved pharmaceutical formulation.