22 March 2003 in The Journal of Chemical Physics
The adsorption properties of water on silica surfaces at 300 K are evaluated by way of grand canonical Monte Carlo simulations, a well suited technique to investigate thermodynamical properties of interfacial fluids. The PN–TrAZ potential is used to describe atomic interactions between water and substrate, and the SPC model for water–water interactions. To measure confinement effects, we compare adsorption on different plane surfaces to a realistic disordered mesoporous material previously obtained by off lattice reconstructions known to reproduce in a realistic way the geometrical complexity of real Vycor of high specific surface, in terms of surface area, chord distribution, and correlation peak in small angle neutron scattering spectra. The adsorption isotherm, and isosteric heat of adsorption are calculated and compared to experimental data found in the literature for Vycor. They show good agreement, the PN–TrAZ potential for the adsorbate–surface interaction being able to give a satisfactory description of hydrophilic properties of plane and curved silica surfaces. For pressure less than 0.65 times the vapor pressure of SPC water at 300 K, the model shows identical adsorption properties for plane and mesoporous surfaces, validating the t-plot concept for such materials, i.e., the fact that the amount of fluid adsorbed is proportional to the surface area of the substrate irrespective of the pore size, as long as the surface chemistry (the OH density in this case) is kept constant. However, for very low relative pressure an analysis of the isosteric heat of adsorption shows the presence of highly energetic sites on the mesoporous Vycor sample probably related to curvature, defects or roughness absent from perfectly plane surfaces. For relative pressure higher than 0.65 a sudden rise in Vycor adsorption is the signature of capillary condensation in the mesoporosity of the material, in agreement with experimental measurements in Vycor. Such a rise is absent on plane surfaces as expected for this confinement-induced capillary condensation.
24 April 2008 in The Journal of Physical Chemistry B
16 November 2010 in Physical Review Letters
We report results of a 14.1\,\,kg\,d measurement with 15 superheated droplet detectors of total active mass 0.208~kg, comprising the first stage of a 30\,\,kg\,d Phase II experiment. In combination with the results of the neutron-spin sensitive XENON10 experiment, these results yield a limit of |ap|<0.32 for MW=50\,\,GeV/c2 on the spin-dependent sector of weakly interacting massive particle-nucleus interactions with a 50% reduction in the previously allowed region of the phase space, formerly defined by XENON, KIMS, and PICASSO. In the spin-independent sector, a limit of 2.3\ifmmode\times\else\texttimes\fi{}10-5\,\,pb at MW=45\,\,GeV/c2 is obtained.
24 February 2005 in The Journal of Chemical Physics
This numerical simulation paper focuses on the adsorption/desorption of water in disordered mesoporous silica glasses (Vycor-like). The numerical adsorbent was previously obtained by off lattice method, and was shown to reproduce quite well the micro- and mesotextural properties of real Vycor, as well as morphological (pore size distribution) and topological (pore interconnections) disorder. The water-water interactions are described by the SPC model while water-silica interactions are calculated in the framework of the PN-TrAZ model. The water adsorption/desorption isotherms and the configurational energies are calculated by the Grand Canonical Monte Carlo simulation method. The low pressure results compare well with experiments, showing the good transferability of the intermolecular potential. It is shown that if the hysteresis loop observed in the adsorption/desorption isotherm is considered as a true phase transition (which is actually still an open question in the case of disordered porous materials), then it is possible to calculate the grand potential by applying the thermodynamic integration scheme. The grand potential is shown to be multivalued for low (subcritical) temperature, and continuous for high (supercritical) temperature. A coexistence point is found within the hysteresis loop, actually close to the vertical desorption line. Below the equilibrium chemical potential, the gaslike branch is stable whereas the liquidlike branch is metastable. The situation is reversed above the coexistence point.
22 April 2014 in Physical Review D
Phase II of SIMPLE (Superheated Instrument for Massive ParticLe Experiments) searched for astroparticle dark matter using superheated liquid ${\mathrm{C}}_{2}{\mathrm{ClF}}_{5}$ droplet detectors. Each droplet generally requires an energy deposition with linear energy transfer (LET) $$\gtrsim${}150\text{ }\text{ }\mathrm{keV}/$\mu${}\mathrm{m}$ for a liquid-to-gas phase transition, providing an intrinsic rejection against minimum ionizing particles of order ${10}^{$-${}10}$, and reducing the backgrounds to primarily $$\alpha${}$ and neutron-induced recoil events. The droplet phase transition generates a millimetric-sized gas bubble that is recorded by acoustic means. We describe the SIMPLE detectors, their acoustic instrumentation, and the characterizations, signal analysis and data selection, which yield a particle-induced, ``true nucleation'' event detection efficiency of better than 97% at a 95% C.L. The recoil-$$\alpha${}$ event discrimination, determined using detectors first irradiated with neutrons and then doped with alpha emitters, provides a recoil identification of better than 99%; it differs from those of COUPP and PICASSO primarily as a result of their different liquids with lower critical LETs. The science measurements, comprising two shielded arrays of fifteen detectors each and a total exposure of 27.77 kgd, are detailed. Removal of the 1.94 kgd Stage 1 installation period data, which had previously been mistakenly included in the data, reduces the science exposure from 20.18 to 18.24 kgd and provides new contour minima of ${$\sigma${}}_{p}=4.3\ifmmode\times\else\texttimes\fi{}{10}^{$-${}3}\text{ }\text{ }\mathrm{pb}$ at $35\text{ }\text{ }\mathrm{GeV}/{\mathrm{c}}^{2}$ in the spin-dependent sector of astroparticle dark matter\char21{}proton interactions and ${$\sigma${}}_{N}=3.6\ifmmode\times\else\texttimes\fi{}{10}^{$-${}6}\text{ }\text{ }\mathrm{pb}$ at $35\text{ }\text{ }\mathrm{GeV}/{\mathrm{c}}^{2}$ in the spin-independent sector. These results are examined with respect to the fluorine spin and halo parameters used in the previous data analysis.
1 November 2003 in The Journal of Chemical Physics
The radial distribution functions obtained by grand canonical Monte Carlo simulations of water adsorbed on disordered mesoporous and ordered plane silica surfaces at 300 K are investigated. The plane surfaces are crystallographic faces of cristobalite. The disordered mesoporous Vycor-like glass was previously obtained by off-lattice reconstruction known to reproduce in a realistic way the geometrical complexity of the real Vycor of high specific surface, in terms of surface area, chord distribution, and correlation peak in small angle neutron scattering spectra. The SPC model is used for water, and water–substrate interactions are described by the PN-TrAZ model without any adjustment of parameter. It is shown that the water confined in Vycor is slightly more structured than bulk water, mainly due to the interaction of the first layer with the substrate. The vapor pressure is reduced so as to obtain a mono-layer coverage for each surface. On ordered crystalline faces, the water mono-layer has long range correlations, that are absent in the case of a disordered silica (Vycor-like sample): The main change being the displacement of the second peak towards larger distances (4.5 Å in bulk, 5 Å in mono-layer), characteristic of bi-dimensional structure of water.