26 December 2022 in IEEE Transactions on Transportation Electrification
Vehicle integrated motion control with the capability to enhance the overall performance by considering the couplings and interactions among various subsystems is an active and open issue. This paper proposes a novel finite-time lateral and longitudinal integrated motion control scheme to bypass the resulting complex nonlinearities on the basis of time-delay estimation. The precise tracking of reference trajectory is achieved where the transient errors are limited to the designed prescribed performance functions. The expected steady-state region can be entered in a fixed time, and then the state errors convergence to zero asymptotically. Meanwhile, actuator faults and external disturbance, for autonomous vehicles equipped with abundant actuators, are frequently encountered in practice. The presented controller incorporating fault-tolerant ability and disturbance rejection is implemented to further optimize the robustness and reliability. Particularly, no auxiliary approximate mechanism or additional prior knowledge is needed. Simulation results for standard maneuvers and planned trajectory tracking are conducted to demonstrate the benefits of the constructed integrated control scheme, in terms of tracking performance (position tracking error dropped over 70%), handling (yaw rate tracing error dropped over 10%), and stability (vehicle sideslip angle dropped over 70%).
11 September 2023 in IEEE Transactions on Automation Science and Engineering
Developing a solution to suppress vibration with low energy consumption is an interesting and significant topic for vehicle suspension. This paper proposes an approximation-free prespecified time energy-efficient fault-tolerant control scheme for active suspensions. Inspired by the X-shaped asymmetric structures that existed in animal limbs, the energy consumption can be significantly reduced, without changing the hardware structure and optimization, only by introducing bionic dynamics. Moreover, the states can converge to a neighborhood of zero within a pre-specified finite time interval by employing the designed bionic control framework. Note that the settling time is independent of the initial values of states and the controller parameters. Meanwhile, system uncertainties, external perturbations, and actuator faults can be handled effectively by the presented approximation-free controller. The knowledge of actuator faults, perturbation, and suspension model is not required for controller design. By using the designed approximation-free prespecified time bionic fault-tolerant controller, excellent ride comfort can be achieved with low energy consumption. Experiments are performed and corresponding comparison results are provided to demonstrate the superiority of the developed control method. Note to Practitioners —Vehicle active suspensions offer a higher degree of control freedom to isolate vibrations, however, are associated with expensive energy consumption. Model uncertainties, non-linearities, external disturbances, and actuator faults in real-world environments can lead to performance degradation. Motivated by this, this paper designs a bio-inspired energy-saving prespecified time approximation-free fault-tolerant controller. By employing dynamical properties inspired by X-type structures that exist in animal limbs or bones, efficient energy-saving control can be achieved. The transient responses are constrained to a prescribed region and converge to a given steady-state region within a pre-assigned time. The proposed controller does not require approximation structures such as neural networks or fuzzy rules. Consequently, the controller exhibits a simple structure that can be readily implemented and deployed in practical suspension systems. Experimental results obtained from practical suspension platforms under different road excitations demonstrate satisfactory energy saving and vibration suppression performance of the presented control scheme.
31 January 2024 in IEEE Transactions on Intelligent Vehicles
Accurate trajectory tracking is unrealistic in real-world scenarios, however, which is commonly assumed to facilitate motion planning algorithm design. In this paper, a safe and reliable motion planning and control framework is proposed to handle the tracking errors caused by inaccurate tracking by coordinating the motion planning layer and controller. Specifically, motion space is divided into safe regions and risky regions by designing the movement restraint size dependent on tracking error to construct the repulsive potential field. The collision-free waypoint set can then be obtained by combining global search and the proposed waypoint set filtering method. The planned trajectory is fitted by an optimization-based approach which minimizes the acceleration of the reference trajectory. Then, the planned trajectory is checked and modified by the designed anti-collision modification to ensure safety. Using invertible transformation and adaptive compensation allows the transient trajectory tracking errors to be limited within the designed region even with actuator faults. Because tracking error is considered and margined at the planning level, safety and reliability can be guaranteed by the coordination between the planning and control levels under inaccurate tracking and actuator faults. The advantages and effectiveness of the proposed motion planning and control method are verified by simulation and experimental results.
8 May 2023 in IEEE Transactions on Intelligent Vehicles
Autonomous vehicles equipped with numerous advanced sensors are capable of obtaining road preview information, creating new opportunities for vehicle suspension systems. This paper proposes a novel preview suspension control method from adaptive nonlinear control perspectives with less computational burden and is more realistic, unlike optimization-based works or existing linear state-space models-based results that neglected nonlinear terms. The X -shaped bio-inspired dynamics derived from animal or insect skeleton structures are introduced to reduce energy consumption by utilizing beneficial geometrical nonlinearities. Meanwhile, optimal velocity planning approach is investigated to balance vehicle passage time, vibration suppression, and longitudinal comfort by solving a multi-objective optimization problem with the aid of road preview information. Moreover, acceleration constraint reduces the search space and computing requirements, while ensuring planned velocity optimality. Simulation and experiment results are provided to demonstrate the effectiveness and advantages of the constructed energy-saving adaptive preview control framework with constrained velocity planning.
20 January 2023 in IEEE Transactions on Automation Science and Engineering
This paper investigates the issue of event-triggered adaptive saturated fault-tolerant control (ESFC) for uncertain nonlinear systems with time-varying full state constraints (TFSCs), actuator saturation and faults as well as unknown control direction. A bounded function with an auxiliary variable is constructed by utilizing a novel dynamics of the auxiliary system, which contributes to reducing the adverse impact of actuator saturation. Different from the previous backstepping-based event-triggered control methods such specifications by either using fuzzy approximation or by employing neural approximation techniques, this paper skillfully addresses the unknown nonlinearities, actuator saturation and faults without involving any approximation structures, and thus, we proposes the ESFC on the basis of low-complexity design framework as contributing to communication and computational resource reduction. A rigorous theoretical analysis shows that the proposed control method is an effective way to handle with the problems of actuator saturation and faults, full state constraints, and unknown system uncertainties, while simultaneously simplifying the backstepping design and avoiding the issue of explosion of complexity. The asymptotic stability of the closed-loop system is guaranteed and the Zeno behavior can be effectively removed. We present an application example of a linear motor scenario to illustrate the effectiveness of the method. Note to Practitioners —Since state constraints, actuator saturation and faults, unknown mechanism model, and limited bandwidths exist extensively in practical engineering systems, which constantly degrade the operation performance of the plant. To handle these disadvantages, this paper is focus on providing simple but effective ESFC methods to ensure the asymptotic stability and enhance reliability. Compared to existing results, the presented method only uses the state signals of system without using system dynamic functions under mild conditions, which provides a theoretical basis, and has the advantages of low-complexity design, and easy implementation in practical engineering. Preliminary physical experimental comparisons demonstrate that this method is applicable to practical liner-motor platform, and achieves satisfactory control performance.
16 January 2025 in IEEE Transactions on Intelligent Transportation Systems
Monocular 3D object detection finds applications in various fields, notably in intelligent driving, due to its cost-effectiveness and ease of deployment. However, its accuracy significantly lags behind LiDAR-based methods, primarily because the monocular depth estimation problem is inherently challenging. While some methods leverage additional information to aid in network training and enhance performance, they are hindered by their reliance on specific datasets. We contend that many components of monocular 3D object detection lack the necessary adaptability, impeding the performance of the detector. In this paper, we propose six adaptive methods addressing issues related to network structure, loss function, and optimizer. These methods specifically target the rigid components within the detector that hinder adaptability. Simultaneously, we provide theoretical insights into the network output and propose two novel regression methods. These methods facilitate more straightforward learning for the network. Importantly, our approach does not depend on supplementary information, allowing for end-to-end training. In comparison with existing methods, our proposed approach demonstrates competitive speed and accuracy. On the KITTI dataset, our method achieves a 17.72% AP3D(IOU = 0.7, Car, Moderate), outperforming all previous monocular methods. Additionally, our approach prioritizes speed, achieving a runtime of up to 52 FPS on an RTX 2080Ti GPU, surpassing all previous monocular methods. The source codes are at: https://github.com/jiayisong/AMNet.