28 December 2021 in IEEE Transactions on Antennas and Propagation
This article presents a switched beamforming antenna array with reconfigurable quad-polarization and switched feed network. The proposed beamforming architecture is configured by a crossed inverted-V antenna array and a dual Butler matrix-based feed network to drive polarization diversity as well as beam steering. The crossed inverted-V array adopts a planar director to enhance antenna gain, while the outputs of the dual Butler matrix network are connected to each pair of the gain-enhanced inverted-V antenna elements. Furthermore, the dual Butler matrix is integrated with a polarization mode selection switch matrix. Based on the switching operations with the dual Butler matrix, both the beamforming and switchable polarizations among vertical, horizontal, right-hand circular, and left-hand circular polarizations (CPs) can be achieved. To verify the switched beam and quad-polarization performance, the proposed architecture with a $1\times $ 4 array configuration was implemented at 5.8 GHz. The measured 1 $\times $ 4 antenna gain excluding the dual Butler matrix showed the average gain of 12.8 dBi(c) for all polarizations. Furthermore, the switched main beams driven by the dual Butler network and the polarization mode selection matrix showed four different angles in a $1\times $ 4 array.
30 September 2020 in IEEE Access
A high gain stacked antenna based on a planar magneto-electric dipole structure is proposed. The main radiator is configured by a probe-fed patch with a symmetrically arranged pair of dipole radiation elements. Further, an additional air-gapped radiator with multiple patch elements is integrated for gain enhancement. Since both the main and stacked radiators are planar structures, the overall volume can remain low-profile regardless of the airgap. To verify the performance of the proposed structure, a single magneto-electric dipole antenna and three different types of stacked radiators were implemented at 5.8 GHz. The magneto-electric dipole antenna showed measured 10-dB impedance bandwidth and gain of 5.2% and 8.0 dBi, respectively with the overall size of 0.96 λ0 x 0.96 λ0 including a ground plane. With the additional stacked radiator having the airgap of 0.1 λ0, the maximum measured gain was increased to 9.6 dBi. Further, to verify the beamforming performances, three types of 1x8 phased array stacked structures were fabricated with a volume of 0.96 λ0 x 6.38 λ0 x 0.14 λ0 at 5.8 GHz. The measurements showed a maximum peak gain of 18.1 dBi and a half-power-beamwidth scan angle of 49˚ with a side-lobe level less than -8 dB.