1 August 2018 in Journal of Physics: Conference Series
The object of the study is the main power elements of mechanical systems made of flexible threads working on the perception of transverse loads. The paper focuses on the calculating the stress-strain state of a flexible thread with nonlinear elasticity by means of MathCAD program based upon geometric and physical nonlinearity of flexible threads. The proposed method is based on mathematical modeling theory including differential and integral calculation of one and several variables functions, as well as on the points of materials strength. We propose a method for nonlinear calculation of the stress-strain state of flexible threads taking into account the real properties which may be introduced to study the work of structures outside the elastic work of the material. Comparison of the parameters of the stress-strain state of a flexible thread obtained with the help of a digital experiment in a computer program, also with the results obtained by the finite element method, confirmed the adequacy of the proposed method and the method of mathematical modeling. Divergences in the values of the calculated parameters were no more than 5%.
1 July 2019 in Journal of Physics: Conference Series
The aim of the research is the numerical simulation of the drum mixer operation, including the identification of geometrical indicators of a material pile in a rotating drum for conducting the force analysis and determining the expended power. The influence of the required performance of the drum device on the parameters of its container with regard to the filling degree is determined analytically using the mixer as an example. The functional model of the central angle of the material segment on the filling degree of the container is established. The expressions for the parameters of a material segment in a rotating container are revealed. They allowed for determining the torque and power consumption of the drive based on the power analysis. The graphic material of changes in the calculated indicators in the modeling process is presented.
1 July 2019 in Journal of Physics: Conference Series
The object of study is a vertical flexible thread rotating at some distance around a vertical axis with a lateral load. The calculation is made for the dynamic load condition in the form of centrifugal forces depending on the displacement of the thread from the initial position. The geometric and physical nonlinearity of the flexible threads is taken into account. The proposed method is based on the theory of mathematical modeling using differential and integral calculus of functions of one and several variables as well as on the theory of resistance of materials. A method of the nonlinear calculation of the stress-strain state of flexible threads, taking into account the real properties of materials is proposed. The text of the calculation in the computer program MatchCAD for calculations of the thread, its deformation and tension was theoretically described and developed. The calculation results corresponded to the results obtained by the finite element method (the discrepancy is about 1%). The implementation of the method makes it possible to study the operation of structures outside the conditions of elastic work of the material. The comparative results of modeling inertia loaded rotating threads with linear properties of changes in their strength properties and in the case of nonlinearity of their properties are presented.
20 March 2020 in E3S Web of Conferences
The article describes the original design of the measuring transducer of angular velocity of the type “flapper-nozzle “. The aim of the study is mathematical modeling in the MathCAD program of the force action of liquid jets exiting nozzles, since this significantly affects the characteristics of the converter. The calculated values of the acting forces are compared by several known methods and their results are compared with experimental data. For the proposed design of the measuring transducer, greater convergence of the theoretical and experimental values of the power characteristic in the linear section is provided by the expressions for determining the force effect of two jets on the damper, defined as the hydrodynamic effect of the liquid jet on the obstacle. Given the real differences in the design of the converter from theoretical models, it is required to apply correction factors. As pressure increases, the coefficient increases from 1 to 1.24-1.30 depending on the pressure supplied to the measuring transducer and the version of expression used to calculate it. When using the expression for the approximate calculation of the acting forces in the converter, the correction factor is much higher and varies from 1.9 at a supply pressure of 0.5 MPa to 1.74 at a supply pressure of 1.5-2.0 MPa. The practical use of this calculation option is limited to the linear zone of pressure dependence in the working chambers of the converter on the gap between the nozzles and the shutter.