Capillary rise within rough structures is a wetting phenomenon that is fundamental to survival in biological organisms, deterioration of our built environment, and performance of numerous innovations, from 3D microfluidics to carbon capture. Here, to accurately predict rough capillary rise, we must couple two wetting phenomena: capillary rise and hemiwicking. Experiments, simulations, and theory demonstrate how this coupling challenges our conventional understanding and intuitions of wetting and roughness. Firstly, the critical contact angle for hemiwicking becomes separation-dependent so that hemiwicking can vanish for even highly wetting liquids. Secondly, the rise heights for perfectly wetting liquids can differ between smooth and rough systems, even with the same 0∘ contact angle. Finally, the raised liquid volumes are substantially increased in rough compared to smooth systems. To explain and predict all rise heights and volumes with quantitative accuracy, we present the Dual-Rise model that is valid for general roughness, liquids, and surface wettabilities.
The fundamental impacts of surface geometry on the stability of wetting states, and the transitions between them are elucidated for square posts and reentrant structures in three dimensions. We identify three principal outcomes of particular importance for future surface design of liquid-repellent surfaces. Firstly, we demonstrate and quantify how capillary condensation and vapour cavitation affect wetting state stabilities. At high contact angles, cavitation is enhanced about wide, closely-spaced square posts, leading to the existence of suspended states without an associated collapsed state. At low contact angles, narrow reentrant pillars suppress condensation and enable the suspension of even highly wetting liquids. Secondly, two distinct collapse mechanisms are observed for 3D reentrant geometries, base contact and pillar contact, which are operative at different pillar heights. As well as morphological differences in the interface of the penetrating liquid, each mechanism is affected differently by changes in the contact angle with the solid. Finally, for highly-wetting liquids, condensates are shown to critically modify the transition pathways in both the base contact and pillar contact modes.
Even for relatively simple thin shell morphologies, many different buckled configurations can be stable simultaneously. Which state is observed in practice is highly sensitive to both environmental perturbations and shell imperfections. The complexity and unpredictability of postbuckling responses has therefore raised great challenges to emerging technologies exploiting buckling transitions. Here we show how the buckling landscapes can be explored through a comprehensive survey of the stable states and the transition mechanisms between them, which we demonstrate for cylindrical shells. This is achieved by combining a simple and versatile triangulated lattice model with efficient high-dimensional free-energy minimisation and transition path finding algorithms. We then introduce the method of landscape biasing to show how the landscapes can be exploited to exert control over the postbuckling response, and develop structures which are resistant to lateral perturbations. These methods now offer the potential for studying complex buckling phenomena on a range of elastic shells.
We develop and harness a phase field simulation method to study liquid filling on grooved surfaces. We consider both short-range and long-range liquid–solid interactions, with the latter including purely attractive and repulsive interactions as well as those with short-range attraction and long-range repulsion. This allows us to capture complete, partial, and pseudo-partial wetting states, demonstrating complex disjoining pressure profiles over the full range of possible contact angles as previously proposed in the literature. Applying the simulation method to study liquid filling on grooved surfaces, we compare the filling transition for the three different classes of wetting states as we vary the pressure difference between the liquid and gas phases. The filling and emptying transitions are reversible for the complete wetting case, while significant hysteresis is observed for the partial and pseudo-partial cases. In agreement with previous studies, we also show that the critical pressure for the filling transition follows the Kelvin equation for the complete and partial wetting scenarios. Finally, we find the filling transition can display a number of distinct morphological pathways for the pseudo-partial wetting cases, as we demonstrate here for varying groove dimensions.