Solution processed perovskite semiconductors have developed rapidly over the past decade to yield excellent performance in both solar cell and light emitting diode devices. Both of these device types are prepared using similar materials and architectures, raising the possibility of perovskite based light emitting solar cells. Recent reports have indicated that some low band gap perovskite solar cells are able to emit infrared light efficiently, however, intermediate band gap perovskite solar cells which emit visible light have not, to the best of our knowledge been deliberately designed or extensively characterized. In this work, we have investigated the use of different electron transport layers in order to minimize energetic barriers to electron injection and extraction in methylammonium lead bromide (MAPbBr3) films. We demonstrate that through appropriate band structure engineering, MAPbBr3 can be used to make such “peroptronic” light-emitting solar cells, which simultaneously exhibit efficient solar cell power conversion efficiencies over 1% and 0.43 lm W−1 green light emission.
Sn-based perovskites have intrinsic defects, such as Sn vacancies, oxidised components (Sn4+), and local lattice strain in the perovskite crystalline structure. In this study, Zn metal powder (Zn0) was introduced to reduce Sn oxidation in the solution step based on the redox potential difference. Additionally, Zn2+ was introduced in the perovskite precursor, which decreased the intrinsic defects and lattice strain of the perovskite films. The diffusion length, particularly that of the hole, increased with a reduction in the lattice strain, and Zn doping led to interfacial energy-level alignment of the perovskite and hole-transporting layers. The reduced lattice strain decreased the defect density and charge carrier recombination of perovskite devices. The power conversion efficiency of the Zn-doped Sn-based perovskite solar cell was improved to 11.39% compared to the 8.56% of the reference device.
24 September 2018 in Journal of Materials Chemistry A
Processing for obtaining compact and uniform perovskite photoactive layers has been intensively studied over the last few years to achieve high power conversion efficiencies (PCEs) in solar cells. Particularly, high quality crystal growth of perovskite layers is critical to enhance device performance. We demonstrate an easy and effective new process for high efficiency p–i–n planar heterojunction structures of perovskite solar cells (PeSCs) by using a compact seed perovskite layer (CSPL). The CSPL assists vertical growth of perovskite crystals and obtains the highly crystalline perovskite photoactive layer, which leads to the reduction in the charge transfer resistance and a longer photoluminescence lifetime. The PeSC device with a CSPL shows a remarkably improved PCE, from 15.07% to 19.25%, with a record open circuit voltage (VOC) of 1.16 V in the p–i–n structure with pure crystal perovskite and negligible current density–voltage hysteresis. Additionally, a PCE of 20.37% was achieved in CSPL assisted n–i–p structure PeSCs.
Among transparent metal oxide semiconductors, systems based on indium oxide currently deliver the best combination of electronic characteristics and optical transmittance, outperforming even the well-established polycrystalline silicon devices. Indium oxide has the unique property that uniform, amorphous films yield superior electronic properties compared to microcrystalline films; for this reason, Ga and Zn hetero-elements are usually added to disrupt crystallization and result in uniformly disordered films. However, dopants have a general tendency to increase the complexity and decrease the mobility of semiconductors and their addition might well be avoided if high-quality, amorphous In2O3 films could be grown without them. In this work, we show that this problem can be resolved by exploiting a synergistic interaction between solution-processed indium oxide (In2O3) and underlying tantalum pentoxide (Ta2O5) dielectric films. We observed that amorphous Ta2O5 inhibits crystallization of In2O3 leading to high-quality amorphous thin films with reduced oxygen deficiencies at the semiconductor/dielectric interface. Transparent Ta2O5/In2O3 TFTs with very low operating voltages were demonstrated with effective field-effect mobilities of up to 23.1 cm2 V−1 s−1 at only 3 V drain–source voltage (VDS) using this approach. Additionally, the suppressed carrier density arising from reduced oxygen deficiencies reduced the drain current at 0 V gate bias (I0) by six orders of magnitude from 0.25 mA to 10.8 nA, compared to a SiO2 reference device. These results highlight the importance of considering an underlying dielectric layer to maximize device performance.
18 June 2025 in ACS Applied Materials & Interfaces