21 October 2015 in Journal of Control Science and Engineering
For the attitude control of a novel stair-climbing wheelchair with inertial uncertainties and external disturbance torques, a new synchronous control method is proposed via combing high-order sliding mode control techniques with cross-coupling techniques. For this purpose, a proper controller is designed, which can improve the performance of the system under conditions of uncertainties and torque perturbations and also can guarantee the synchronization of the system. Firstly, a robust high-order sliding mode control law is designed to track the desired position trajectories effectively. Secondly, considering the coordination of the multiple joints, a high-order sliding mode synchronization controller is designed to reduce the synchronization errors and tracking errors based on the controller designed previously. Stability of the closed-loop system is proved by Lyapunov theory. The simulation is performed by MATLAB to verify the effectiveness of the proposed controller. By comparing the simulation results of two controllers, it is obvious that the proposed scheme has better performance and stronger robustness.
1 January 2014 in Mathematical Problems in Engineering
A novel approach for modeling and control of servo systems with backlash and friction is proposed based on the characteristic model. Firstly, to deal with friction‐induced nonlinearities, a smooth Stribeck friction model is introduced. The backlash is modeled by a continuous and derivable mathematical function. Secondly, a characteristic model in the form of a second‐order slowly time‐varying difference equation is established and verified by simulations. Thirdly, a composite controller including the golden‐section adaptive control law and the integral control law is designed and the stability of the closed‐loop system is analyzed. The simulation and experimental results show that the proposed control scheme is effective and can improve the steady‐state precision and the dynamic performance of the servo system with backlash and friction.
1 January 2018 in Complexity
Motivated by rapid growth of cyberphysical systems (CPSs) and the necessity to provide secure state estimates against potential data injection attacks in their application domains, the paper proposes a secure and innovative attack detection and isolation fusion framework. The proposed multisensor fusion framework provides secure state estimates by using ideas from interactive multiple models (IMM) combined with a novel fuzzy‐based attack detection/isolation mechanism. The IMM filter is used to adjust the system’s uncertainty adaptively via model probabilities by using a hybrid state model consisting of two behaviour modes, one corresponding to the ideal scenario and one associated with the attack behaviour mode. The state chi‐square test is then incorporated through the proposed fuzzy‐based fusion framework to detect and isolate potential data injection attacks. In other words, the validation probability of each sensor is calculated based on the value of the chi‐square test. Finally, by incorporation of the validation probability of each sensor, the weights of its associated subsystem are computed. To be concrete, an integrated navigation system is simulated with three types of attacks ranging from a constant bias attack to a non‐Gaussian stochastic attack to evaluate the proposed attack detection and isolation fusion framework.
10 November 2015 in Mathematical Problems in Engineering
The analysis and design of traditional networked control systems focused on single closed-loop scenario. This paper introduces a distributed control approach for the networked control systems (NCSs) with multiple subsystems based on a time-triggered network protocol. Firstly, some basic ideas of the time-triggered protocol are introduced and a time schedule scheme is employed for the NCS. Then, a novel model is proposed to the NCS regarding the network-induced delay. The resulting closed-loop system is time-delay linear system considering a distributed control law. A sufficient condition toconsensus control is present based on the Lyapunov-Krasovskii function. Also, the controller design approach towards the givenperformance index is given by a cone complement linearization and iterative algorithm. Finally, numerical examples are given to validate the approach.