A mathematical model of complex vibrations exhibited by contact dynamics of size-dependent beam-plate constructions was derived by taking the account of constraints between these structural members. The governing equations were yielded by variational principles based on the moment theory of elasticity. The centre of the investigated plate was supported by a beam. The plate and the beam satisfied the Kirchhoff/Euler-Bernoulli hypotheses. The derived partial differential equations (PDEs) were reduced to the Cauchy problems by the Faedo-Galerkin method in higher approximations, whereas the Cauchy problem was solved using a few Runge-Kutta methods. Reliability of results was validated by comparing the solutions obtained by qualitatively different methods. Complex vibrations were investigated with the help of methods of nonlinear dynamics such as vibration signals, phase portraits, Fourier power spectra, wavelet analysis, and estimation of the largest Lyapunov exponents based on the Rosenstein, Kantz, and Wolf methods. The effect of size-dependent parameters of the beam and plate on their contact interaction was investigated. It was detected and illustrated that the first contact between the size-dependent structural members implies chaotic vibrations. In addition, problems of chaotic synchronization between a nanoplate and a nanobeam were addressed.
A methodology for obtaining the optimal structure and distribution for the gradient properties of a material in order to reduce the stress level in a soldered joint was constructed. The developed methodology was based on a combination of topological optimization methods (the moving asymptotes method) and the finite elements method; it was first implemented to solve problems of optimizing soldered joints. Using the proposed methodology, a number of problems were solved, allowing one to obtain optimal structural characteristics, in which a decrease in stress is revealed. Designing compounds using this technique will provide more robust designs. The proposed technique can be applied to a wide class of practical problems.
1 January 2017 in Bulletin of the South Ural State University Series "Mechanical Engineering Industry"