A steady laminar two-dimensional magneto-hydrodynamics mixed convection flow in a square inclined cavity filled with Cu–water nanofluid is investigated numerically by using the finite difference method. The left and right vertical sidewalls of the cavity are considered adiabatic and move upward, while a partial slip flow condition is imposed on these walls. The horizontal top wall is considered cold and stationary, while a part of the stationary bottom wall is subjected to a uniform heat source and the remaining parts of it are considered adiabatic. An adiabatic obstacle is located in the center of the cavity and an external magnetic field is applied parallel to the horizontal x-axis. Parametric studies of the influence of various parameters such as Hartmann number, inclination angle of the cavity, dimensionless heat generation/absorption coefficient, obstacle aspect ratio, dimensionless length and location of the heat source, and solid volume fraction on the fluid flow and heat transfer have been performed. Comparisons with previously published numerical work are performed, and good agreements between the results are observed. It is found that the nanofluid was better than water to enhance the heat transfer when the effect of the magnetic field is weak, while the water is better than the nanofluid when its effect is strong. Moreover, the results indicated that the partial slip has a significant effect on the above-mentioned parameters.
6 February 2017 in International Journal of Numerical Methods for Heat & Fluid Flow
Purpose: This paper aims to investigate the entropy generation due to magnetohydrodynamic natural convection flow and heat transfer in a porous enclosure filled with Cu-water nanofluid in the presence of viscous dissipation effect. The left and right walls of the cavity are thermally insulated. There are heated and cold parts, and these are placed on the bottom and top wall, respectively, whereas the remaining parts are thermally insulated. Design/methodology/approach: The finite volume method is used to solve the dimensionless partial differential equations governing the problem. A comparison with previously published woks is presented and is found to be in an excellent agreement. Findings: The minimization of entropy generation and local heat transfer according to different values of the governing parameters are presented in details. It is found that the presence of magnetic field has negative effects on the local entropy generation because of heat transfer and the local total entropy generation. Also, the increase in the heated part length leads to a decrease in the local Nusselt number. Originality/value: This problem is original, as it has not been considered previously.