We demonstrate a flexible wearable optical fiber strain sensor using side-polished fiber Bragg grating (FBG) with a D-shaped polished zone of ~54 μm depth and ~15 mm length. The opto-mechanical response of the sensor embedded in a biocompatible polydimethylsiloxane elastomer is firstly investigated through various subtle wrist pulse tests. In comparison to a bare FBG, the developed sensor exhibits about two times of magnitude larger in time domain due to the more sensitive light-strain interaction with fiber gratings. Then along with the sound wave profiles of original audios, the extracted throat vibration signals validate the great potential of the sensor for wearable human speech detection.
We demonstrate here a miniature broadband (up to ~12.8 MHz) fiber-tip photoacoustic probe with ~68.32-μm thick MoS2-polydimethylsiloxane (PDMS) composite coating for ultrasound velocity adjustment by the regressive dependence on the temperature and density of saline solution. The composite was applied to the tip of a double-clad fiber with an outer diameter of 125 μm using drop casting. Under a 5-ns pulsed laser excitation, the developed probe sensitivities to temperature and density in the range of 20-50 °C and 0.99-1.10 g/cm3 were investigated in terms of the change in velocity and attenuation of ultrasonic wave transmitting in the saline solution. An excellent goodness of fit (R2>0.99) and significance of the binary linear regression (F>>F0.01) were achieved with the corresponding mean relative errors of 0.38% and 0.12% for measured temperatures and densities, along with a tunable range of 1478.51 to 1679.13 m/s. The proposed technique could therefore be extended for in situ matching ultrasound velocity of coupling liquid at the transducer-tissue boundary in optoacoustic imaging.