Microsupercapacitors (MSCs) have garnered considerable attention as a promising power source for microelectronics and miniaturized portable/wearable devices. However, their practical application has been hindered by the manufacturing complexity and dimensional limits. Here, we develop a new class of ultrahigh areal number density solid-state MSCs (UHD SS–MSCs) on a chip via electrohydrodynamic (EHD) jet printing. This is, to the best of our knowledge, the first study to exploit EHD jet printing in the MSCs. The activated carbon-based electrode inks are EHD jet-printed, creating interdigitated electrodes with fine feature sizes. Subsequently, a drying-free, ultraviolet-cured solid-state gel electrolyte is introduced to ensure electrochemical isolation between the SS–MSCs, enabling dense SS–MSC integration with on-demand (in-series/in-parallel) cell connection on a chip. The resulting on-chip UHD SS–MSCs exhibit exceptional areal number density [36 unit cells integrated on a chip (area = 8.0 mm × 8.2 mm), 54.9 cells cm−2] and areal operating voltage (65.9 V cm−2).
Conventional power-integrated wireless neural recording devices suffer from bulky, rigid batteries in head-mounted configurations, hindering the precise interpretation of the subject’s natural behaviors. These power sources also pose risks of material leakage and overheating. We present the direct printing of a power-integrated wireless neural recording system that seamlessly conforms to the cranium. A quasi–solid-state Zn-ion microbattery was 3D-printed as a built-in power source geometrically synchronized to the shape of a mouse skull. Soft deep-brain neural probes, interconnections, and auxiliary electronics were also printed using liquid metals on the cranium with high resolutions. In vivo studies using mice demonstrated the reliability and biocompatibility of this wireless neural recording system, enabling the monitoring of neural activities across extensive brain regions without notable heat generation. This all-printed neural interface system revolutionizes brain research, providing bio-conformable, customizable configurations for improved data quality and naturalistic experimentation.
Recent advances in smart contact lenses are essential to the realization of medical applications and vision imaging for augmented reality through wireless communication systems. However, previous research on smart contact lens has been driven by external electrical wired systems or wireless power transfer with temporal and spatial restrictions, which can limit their continuous use. Therefore, an essential prerequisite for electronic smart contact lenses is their monolithic integration with energy storage devices. However, conventional rigid, large sized, and fixed-shaped energy storage devices are not suitable for the soft, smart contact lens. Here, we demonstrate a new class of wirelessly-rechargeable solid-state supercapacitors directly printed on smart contact lenses. Supercapacitors are known to exhibit long cycle lives and high-power density, which are suitable for consistent fast wireless charging and discharging for operating the electronic devices in the smart contact lens. The arc-shaped form factor and limited area of the printed supercapacitor require a high-precision microscale direct ink writing (DIW) process and tailored component inks. The printed solid-state supercapacitor integrated smart contact lens show great potential as an effective/scalable platform for wearable electronics with continuous operation.