25 May 2021 in IEEE Transactions on Power Electronics
This article presents a flux linkage-based direct model predictive current control approach that achieves favorable performance both during steady-state and transient operation. The former is achieved by computing the optimal time instants at which a new switch position is applied to the converter. To this end, the future current behavior is not computed based on the machine inductances or inductance look-up tables; instead, flux linkage maps are utilized to predict the trajectory of the magnetic flux linkage, and subsequently of the current. This is advantageous for electric drives with noticeable magnetic nonlinearity in terms of saturation and/or cross-coupling effects. Hence, by using flux linkage maps in the prediction process, the evolution of the stator current can be calculated more accurately, enabling the controller to make better switching decisions. Moreover, the discussed predictive controller exhibits excellent dynamic performance owing to its direct control nature, i.e., the control and modulation tasks are performed in one computational stage rendering a dedicated modulation stage redundant. Three different drive systems based on permanent magnet synchronous motors are examined to demonstrate the effectiveness of the presented control approach.
8 March 2024 in IEEE Transactions on Energy Conversion
In-depth evaluations of an electric drive's behavior typically result from co-simulation, combining models of motor, power electronics and control software. This approach can be used to evaluate pulse patterns for a given operating point, e.g., for electric vehicle applications, preventing real-world experiments. Here, the co-simulation model is fed with offline calculated optimized pulse patterns (OPPs) that are used to increase, among others, the drive's efficiency. Due to the large motor time constant compared to the fundamental wave period, reaching steady state using a simple open-loop control requires unnecessary long simulation times. Hence, a model predictive closed-loop control implementation of the OPPs is proposed which reduced the overall computational effort significantly. However, it turns out that the OPP evaluation using a finite-element-method-based co-simulation for a permanent magnet synchronous motor remains largely uncertain in terms of the predicted power losses which led to the development of a semi-analytical model to further reduce the required computational time. As none of the approaches was able to deliver a suitable trade-off between model accuracy and calculation time, this investigation highlights the remaining challenges of evaluating OPPs based on drive co-simulations motivating further research towards the surrogate-assisted or direct experimental OPP optimization in the future.
16 September 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
This paper proposes an optimal modulation scheme which improves the performance of drive trains used in electric vehicles. To this aim, the proposed optimized pulse patterns (OPPs) are computed by minimizing the stator current harmonic distortions while limiting the harmonic winding and converter switching losses. To ensure that the most favorable trade-off between current distortions and system efficiency is achieved, the proposed OPPs are computed based on a model that accurately accounts for the anisotropy of the machine as well as the eddy current effects on its windings and ohmic losses. The proposed OPPs are assessed experimentally with an industrial drive system, and their benefits are clearly demonstrated via comparisons with space vector modulation (SVM) and conventional isotropic OPPs.
27 November 2023 in TechRxiv
In-depth evaluations of an electric drive's behavior typically result from co-simulation, combining models of motor, power electronics and control software. This approach can be used to evaluate pulse patterns for a given operating point, e.g., for electric vehicle applications, preventing costly real-world experiments. Here, the co-simulation model is fed with offline calculated optimized pulse patterns (OPPs) that are used to increase, among others, the drive's efficiency. Due to the large motor time constant compared to the fundamental wave period, reaching steady state using a simple open-loop control requires unnecessary long simulation times. Hence, a model predictive closed-loop control implementation of the OPPs is proposed which reduced the overall computational effort significantly. However, it turns out that the OPP evaluation using a finite-element-method-based co-simulation for a permanent magnet synchronous motor remains largely uncertain in terms of the predicted power losses which led to the development of a semi-analytical model to further reduce the required computational time. As none of the approaches was able to deliver a suitable trade-off between model accuracy and calculation time, this investigation highlights the remaining challenges of evaluating OPPs based on drive co-simulations motivating further research towards the surrogate-assisted or direct experimental OPP optimization in the future.