Attributed to its advantages of super mechanical flexibility, very low-temperature processing, and compatibility with low cost and high throughput manufacturing, organic thin-film transistor (OTFT) technology is able to bring electrical, mechanical, and industrial benefits to a wide range of new applications by activating nonflat surfaces with flexible displays, sensors, and other electronic functions. Despite both strong application demand and these significant technological advances, there is still a gap to be filled for OTFT technology to be widely commercially adopted. This paper provides a comprehensive review of the current status of OTFT technologies ranging from material, device, process, and integration, to design and system applications, and clarifies the real challenges behind to be addressed.
With its excellent mechanical flexibility, low-cost and low-temperature processing, the solution processed organic field-effect transistor (OFET) is a promising platform technology for developing ubiquitous sensor applications in digital health, environment monitoring and Internet of Things. However, a contradiction between achieving low voltage operation and having stable performance severely hinder the technology to become commercially viable. This work shows that, by reducing the sub-gap density of states (DOS) at the channel for low operation voltage and using a proper low-k non-polar polymer dielectric layer, such an issue can be addressed. Stable electrical properties after either being placed for weeks or continuously prolonged bias stressing for hours in ambient air are achieved for all solution processed unencapsulated OFETs with the channel being exposed to the ambient air for analyte detection. The fabricated device presents a steep subthreshold swing less than 100 mV/decade and an ON/OFF ratio of 106 at a voltage swing of 3 V. The low voltage and stable operation allows the sensor made of the OFET to be incorporated into a battery-powered electronic system for continuously reliable sensing of ammonia vapor in ambient air with very small power consumption of about 50 nW.
Solution-processed low-voltage organic thin-film transistors (OTFTs) were fabricated using the high-mobility donor-acceptor copolymer semiconductor indacenodithiophene-co-benzothiadiazole (IDTBT) and large permittivity (high-k) relaxor ferroelectric polymer poly (vinylidene fluoride-trifluoroethylene-chlorofloroethylene). It is shown that, with the face-on molecule packing in as-deposited IDTBT films, the close interfacing between the backbone and the dielectric layer causes significant mobility degradation of the fabricated OTFTs due to dipole effects. By inserting a thin, low-polar dielectric layer between the high-k one and the channel, the dipole field can be effectively screened and the devices present a high mobility similar to that of previously reported high-voltage IDTBT OTFTs. With the bilayer gate dielectric and the IDTBT semiconductor, low-voltage OTFTs are achieved with the average mobility of 1.4 cm 2 /V· s and ON/OFF-current ratio larger than 10 6 , which is among the best reported performance so far for solution processed low-voltage OTFTs.
10 December 2013 in Journal of Materials Chemistry C
Inkjet printed silver (IJP Ag) source/drain (S/D) and gate electrodes were incorporated into a bottom-gate bottom-contact organic thin film transistor (OTFT) architecture to develop all-solution-processed low voltage OTFTs. With well controlled ink wetting on a cross-linked polyvinyl-alcohol surface, IJP Ag S/D electrode pairs were fabricated with controllable short channels down to 20 μm using a Dimatix 2831 inkjet printer with a 10 pL cartridge, and formed good contacts with the organic semiconductor layer. IJP gate electrodes with a low flat surface profile were also achieved to obtain OTFTs of high quality gate dielectric layer for low leakage current. The fabricated low voltage all-solution-processed OTFTs present good device performance with a low operation voltage below 2 V, a mobility of 0.3 cm2 V−1 s−1, and an ON/OFF current ratio larger than 104.
Low-voltage organic-field effect transistors (OFETs) using relaxor ferroelectric polymer poly (vinylidene fluoridetrifluoroethylene-chlorofloroethylene) P (VDF-TrFE-CFE)) were fabricated. The measured hysteresis loop and the threshold voltage shift under negative bias stress (NBS) are opposite to that of the reference device using low-k CYTOP gate dielectric layer, in which the hysteresis and NBS-induced instabilities are explained by gate bias-induced charge trapping. The anomalous behaviors in the P (VDF-TrFE-CFE) OFETs are attributed to the stress-induced remnant polarization in P (VDF-TrFE-CFE), which induces additional mobile charges into the channel. By adding a thin CYTOP layer between the P (VDF-TrFE-CFE) layer and the semiconductor layer, the two effects of charge trapping and remnant polarization under gate bias are found to be neutralized with each other, resulting in low-voltage OFETs of negligible hysteresis and excellent NBS stability.
This letter realizes both large gate dielectric capacitance and reduced sub-gap density of states at the channel in the same organic field effect transistor (OFET) structure by adopting optimized low-k/high-k bilayer gate dielectric. Subthreshold swing (SS) as small as 64 mV dec -1 can be achieved with a thick (>360 nm) gate dielectric layer. This is the smallest SS value reported so far for all reported low voltage OFETs, and is even comparable with that of 22 nm technology node Si-FETs. The device can thus be switched within a very small voltage swing of 0.8 V, while having an ON/OFF ratio larger than 105. The device also shows excellent operational and storage stabilities.