16 March 2025 in Advanced Materials
23 March 2023 in IEEE/ASME Transactions on Mechatronics
Minimally invasive surgery is gaining wide-spread attention in the laboratory and the clinic due to its advantages of less trauma, less pain, and faster recovery. Miniature continuum instruments with a large central channel are needed for reducing damage to healthy tissue and delivering multiple surgical tools in microsurgery such as fetal surgery and maxillary sinus surgery. In this article, we proposed a novel miniature spring-based cable-driven continuum manipulator characterized by its offset neutral bending plane and its simple and clever structure. These features enable the manipulator to have several advantages such as easy miniaturization, bending stability and uniformity, a large central channel, smaller cable tension required, and low cost. A piecewise constant curvature model, with the offset neutral bending plane taken into account, is presented for the kinematic control of the proposed manipulator. To explore the relationship between the cable tension and manipulator bending angle, the statics model based on the equivalent model principle, is exhaustively discussed. The accuracy of kinematics and statics models, as well as the design superiority, was verified experimentally. Furthermore, teleoperation experiments of peg-transfer tasks and porcine tissue laser ablation are conducted to verify the feasibility and effectiveness of the proposed manipulator in different forms. Final, design variations are showcased to enrich manipulator design and functionality.
10 January 2019 in Nature Communications
Innate preference toward environmental conditions is crucial for animal survival. Although much is known about the neural processing of sensory information, how the aversive or attractive sensory stimulus is transformed through central brain neurons into avoidance or approaching behavior is largely unclear. Here we show that Drosophila larval light preference behavior is regulated by a disinhibitory mechanism. In the disinhibitory circuit, a pair of GABAergic neurons exerts tonic inhibition on one pair of contralateral projecting neurons that control larval reorientation behavior. When a larva enters the light area, the reorientation-controlling neurons are disinhibited to allow reorientation to occur as the upstream inhibitory neurons are repressed by light. When the larva exits the light area, the inhibition on the downstream neurons is restored to repress further reorientation and thus prevents the larva from re-entering the light area. We suggest that disinhibition may serve as a common neural mechanism for animal innate preference behavior.
31 July 2023 in IEEE Robotics and Automation Letters
Safe human-robot interaction and excellent motion flexibility ensure a wide range of potential applications for soft robots in industry and medicine. Although many efforts have been made to empower soft robots with variable stiffness, solutions for miniaturization, wide-range, and rapid-response stiffness have yet to be realized. To maintain the combination of motion flexibility and operation stability, in this work a soft variable stiffness manipulator with a diameter of 10.7 mm based on a low melting point alloy (LMPA) solution is proposed. Inspired by reinforced concrete structures, LMPA structures can be freely designed and optimized by a novel 2D to 3D fabrication method for the first time. The crossed pattern LMPA was selected as the variable stiffness skeleton of the manipulator through comparative experiments. Under hot and cold water circulation, the rigid-soft transition time is reduced to 10–15 seconds due to structure optimization. Tests have shown that the omnidirectional steering manipulator can easily be bent over $180^{\circ }$ with high repeatability (standard deviation of $1.37^{\circ }$ ) in the soft state and lock the shape at any bend angle with a stiffness of about 415.45 N/m in the rigid state. The rapid and wide variation in stiffness of the soft manipulator can be used as a small platform for minimally invasive surgical tools in confined spaces.
4 March 2022 in Journal of Materials Science & Technology
3 July 2024 in IEEE Transactions on Medical Robotics and Bionics
Robotic ultrasound imaging systems (RUSs) have captured significant interest owing to their potential to facilitate autonomous ultrasound imaging. However, existing RUSs built upon robotic systems oriented towards conventional manufacturing struggle to navigate the variable and dynamic clinical environments. We introduce a portable and lightweight RUS designed to enhance adaptability for ultrasound imaging tasks. The proposed system features multiple parallel rings and bearings, affording it four degrees-of-freedom for precise posture control. Further enhancing its adaptability, the actuators are isolated from the mechanism and connected by a cable-sheath mechanism, resulting in a mere 519g lightweight structure that attaches to the body. Quantitative assessments indicate that within a vast workspace of 981 cm3, the posture control precision of the probe is measured at 1.3210.1mm and 1.811.1∘, 1.912.26∘, 0.8 10.8∘. The maximum compression force measured for the probe is 14.5 N. The quantitative evaluation results show that the system can attach to various parts of the human body for image acquisition. In addition, the proposed system excels in performing stable scanning procedures even in rapidly changing dynamic environments. Our system can realize imaging tasks with a much lighter structure and has the potential to be applied to more complex scenarios.