Дослідження присвячене питанню аналізу керованості за виходом динамічної системи з гіроскопічною структурою у разі дії дисипативних сил та сил радіальної корекції з урахуванням певного нелінійного змішаного виду зовнішніх збурень, динаміка руху якої описується за допомогою побудованих за вихідними математичними моделями «вхід – вихід» математичних моделей «вхід – стан – вихід» для n - та 2n -мірної розмірності простору стану, які являють собою системи лінійних неоднорідних диференціальних та алгебраїчних рівнянь зі складеною нелінійною правою частиною, та кожна з яких подається у двох формах залежно від існування та відсутності можливості об’єднання зовнішніх збурень, що діють на досліджувану систему. За кожною з одержаних форм моделей «вхід – стан – вихід» проведено аналіз керованості за виходом системи, на основі якого встановлено, що для аналізованої системи виконуються умови повної керованості відносно вихідних змінних, що означає, що область керованості за виходом системи співпадає зі всім простором виходу системи, у який може бути переведено вихід системи за кінцевий час, причому на результати аналізу керованості за виходом досліджуваної системи впливають тільки результати дослідження однієї з отриманих матриць керованості, складеної для випадку наявної можливості об’єднання збурюючих сил у моделі в n - або 2n -мірному просторі стану системи. Використання інших форм подання моделей системи виявилось менш затребуваним у зв’язку з ускладненням відповідної матриці керованості за виходом поряд зі співпадінням отриманих результатів для зазначених моделей. Отримані результати є справедливими для систем будь-якої розмірності і можуть бути використані для розширення використання досліджуваних математичних моделей та підвищення динамічних властивостей досліджуваного об’єкта. The research refers to the issue of analyzing the output controllability of a dynamical system with a gyroscopic structure under the influence of dissipative and radial correction forces with a certain nonlinear external disturbances of mixed type, movement dynamics of which is described with the refined mathematical “input-output” models that are accepted for work as initial ones. For each of such models are constructed the “input-state-output” models in an n- and 2n-dimensional state space that are presented in the form of linear nonhomogeneous differential and algebraic equations with a compound nonlinear right-hand side and, depending from the certain physical limitations of the object, has two different forms of presentation – with the existing possibility (impossibility) of union of disturbing forces acting on the system. For each of obtained «input-state-output» models an analysis of the system’s output controllability is carried out, according to which it is established that for the studied system the conditions of complete controllability in terms of output variables are satisfied, that means that the systems’ output controllability subspace coincides with the entire systems’ output space, into which the output of the system can be transferred in a finite time interval. Besides, it was observed that the results of the analysis of the output controllability are affected only by the results of the study of one of the obtained output controllability matrices compiled for the case of the existing possibility of combining disturbing forces in the n- and 2n-dimensional state-space models. The use of another form of representation of the models is turned out to be less popular due to the complication of the corresponding output controllability matrix along with the coincidence of the results obtained for the specified models.
This study considers a change in the cellulose-containing fabric condition during combustion. The task addressed is to construct a mathematical apparatus that makes it possible to predict the fabric performance under external thermal influence. This description must directly account for the relationship between the properties of the fabric and its physicochemical properties and the arrangement of its structural elements – individual fibers. The result of this work is the constructed mathematical model that makes it possible to study the combustion of fabric in a gas (air) environment. Combustion is initiated by an external thermal effect, set by two external temperatures – the temperature of the gas environment and the temperature of the radiation source. The model equations take into account heat transfer by thermal conductivity, convection of the gas environment, and thermal radiation. In this case, the gas is considered optically transparent, and the fiber components of the fabric are opaque. The speed of movement of the gas environment in the fabric is described by Darcy's law. The change in the concentration of gases is determined by their convection and participation in chemical reactions; the change in the amount of fiber matter is determined by chemical transformations whose sequence and reaction rates are considered known. The key feature of the model is the direct connection between the combustion patterns of individual fibers and the combustion of the fabric formed by these fibers. Preliminary numerical modeling of heterogeneous combustion shows that, even with one-sided ignition, due to a lack of oxygen, the combustion front of the fabric spreads from both surfaces of the fabric to its center. Simulating the burning of a fabric 1 mm thick, consisting of fibers with an initial radius of 10 μm, in the event of ignition gives a characteristic burning time of 10 s. Applying a protective coating 4 μm thick to the fibers extends the burning time of this fabric approximately by 3 times
This paper presents a comprehensive study of 3D magnetic field modeling for a Hall effect-based electromagnetic transducer designed for high-precision, non-contact measurement of ferromagnetic film thickness. The transducer features a solenoidal coil and a sensitive gold Hall plate, with the test material placed between them. Magnetic field interaction with the material causes measurable changes in Hall voltage, correlating with layer thickness. A simulation model was developed in ANSYS Maxwell to visualize magnetic field distribution and study its dependence on geometry, material properties, and sensor positioning. Simulations with and without the specimen allowed analysis of system sensitivity and resolution, leading to the identification of optimal design parameters. The study demonstrates improved es the importance of computational methods in the development, optimization, and validation of electromagnetic measurement systems. The integration of simulation tools enhances predictive capability and reduces reliance on costly experimental testing, making the approach valuable for industrial applications requiring precise, real-time thickness control.