Bowtie antennas are ubiquitous in practical ground-penetrating radars. In spite of having a wide impedance bandwidth, boresight gain of these antennas is small and the main beam gets tilted beyond a 4:1 bandwidth. In this paper, a bowtie antenna design is presented, which has a return loss of at least 10 dB from 420 MHz to 5.5 GHz (13:1 bandwidth) and a stable radiation pattern and improved gain throughout the bandwidth. A superwide bandwidth is obtained without any kind of dissipative loading. The peak gain and average gain are 7.96 and 5.89 dBi, respectively. The gain of the antenna is improved using parasitic loops as directors. The size of the antenna is only 0.322λ at 420 MHz.
30 June 2012 in AEU - International Journal of Electronics and Communications
A differential triple-band dual-polarized cavity-backed substrate-integrated waveguide (SIW) slot antenna is presented in this letter. The hybrid TE 130 , TE 320 , and TE 140 modes of the square SIW cavity are excited by differential feed for a triple-band realization. The proposed antenna exhibits dual-polarized radiations at 9.06, 11.86, and 14.23 GHz. An isolation better than 40 dB in all the three frequency bands between the differential ports is obtained. The proposed structure exhibits the differential gain of 5.4, 10.7, and 9.5 dBi at 9.06, 11.86, and 14.23 GHz, respectively. To validate the design approach, the proposed antenna is fabricated and its characteristics are measured.
1 July 2021 in International Journal of Heat and Mass Transfer
The rheological behavior of a short-polyester-fiber-filled polyurethane elastomer composite containing different bonding agents has been studied in the temperature range 120–160°C and in the shear rate range 63–608s−1. The composite with and without bonding agents showed a pseudoplastic behavior which decreased with the increase of temperature. Composites containing bonding agents based on polypropyleneglycol and 4,4′-diphenylmethane-diisocyanate showed the lowest viscosity values at a particular shear rate, whereas composites containing a glycerol-(GL) based bonding agent showed the highest viscosity. The viscosity of the composite decreased sharply after a particular temperature (140°C) and the fall was less drastic in the composite containing a GL-based bonding agent.