1 October 2014 in Sensors and Actuators B: Chemical
1 January 2010 in Journal of Adhesion Science and Technology
Polymers are widely used in micro-systems for biological detection and sensing and to provide easier alternatives for fabrication of Biomedical Micro-devices (BMMDs). The most widely used polymeric system amenable to micro-fabrication is silicone rubber, particularly poly(dimethylsiloxane) (PDMS). The principal advantage that silicone rubber offers is its ability to get replicated with high aspect ratios by micro-molding. In addition to PDMS, other polymer systems, like resists or epoxies, find extensive use in micro-fabrication providing many aspects such as good interlayer bonding, selective patterning, modified physical properties like variable electrical or optical properties, etc. Most polymer systems are amenable to rapid changes in their surface energies as they are exposed to gas plasmas or UV radiation. Such changes can sometimes be reversible and the exposed surfaces can regain their original configuration with time called hydrophobic recovery. In general, polymer surfaces after such external stimuli become constitutionally highly dynamic and this makes them well suited to prominent applications in fabrication of BMMDs. Our group has extensively worked in the area of polymer surface modification by external stimuli and its characterization and in this paper we have attempted to review some of the group's work.
10 April 2007 in Journal of Microelectromechanical Systems
A novel on-chip inexpensive platform to perform DNA amplification has been fabricated by optimizing the design and microfabrication processes using polydimethyl siloxane (PDMS) and silicon. The silicon base contains a set of microfabricated platinum heater structures on the bottom with a 140-nm-thick spin-on-glass (SOG) layer on the top and a 3 mul replica molded PDMS chamber with feed channels and inlet-outlet ports bonded to this film. The plasma exposed SOG surface is found to undergo recovery of hydrophobicity with time as indicated by an increase in advancing contact angle and bonds very well to another plasma exposed PDMS piece. The bonding protocol developed can be used for a diverse range of substrates, which may form a basis for integration of fluidic assays with microelectronics. The hydrophobic recovery of the microchamber and channels also eliminate the need for various surface passivation techniques for polymerase chain reaction (PCR) chips. A thermal cycler with flexible PCR cycle control is designed and implemented by using a sensing thermocouple. The amplification has been tested using picogram-level template DNA concentration. We have further been able to show negligible nonspecific binding of the template DNA to the hydrophobic interiors of our device by fluorescence measurements and have been able to successfully demonstrate the possibility of multiple usage of this chip without cross-contamination from the previous run
1 December 2011 in Journal of Colloid and Interface Science