1 October 2021 in NDT & E International
18 August 2023 in IEEE Transactions on Instrumentation and Measurement
Steel microstructure determines the mechanical properties of steel such as hardness and tensile strength. To monitor steel microstructure evolution during thermal processing such as hot rolling, online measurement of microstructure is vital to steel quality control. Previous studies using multi-frequency eddy-current testing to monitor the change of electromagnetic properties and infer steel microstructures have achieved remarkable success, yet due to the high-frequency excitation signal, the inspected thickness of steel microstructures is constrained on the surface due to the skin effect. This study introduces the pulsed eddy-current (PEC) method to characterise the electromagnetic property profile along the depth of thick steel plates. The low-frequency square wave signal enables PEC to reflect multi-layer characteristics in a single measurement with good penetration ability. An explicit analytical equation for calculating the time domain PEC response is derived for the first time which shows advantages in terms of speed and gaining in-depth physical insights. A custom PEC system has been designed and built with a TMR sensor as the receiver. Theoretical and numerical analysis are performed. A time domain intersection point on the Tau curve is found to be a useful indication of the properties of a planar structure. Experimental results on layered planar structures of various electromagnetic properties are analysed and validated.
10 August 2018 in IEEE Sensors Journal
Liquid-liquid separation is an important process in many chemical engineering applications. The ability to monitor this process, in particular with a non-contact method, is of high value. This paper proposes and implements a novel sensing system adopting a differential electromagnetic inductive sensor and a field-programmable gate array-based impedance analyzer to monitor the separation processes of an oil-in-saline liquid system. The inductive sensor has a concentric cylinder structure with its coils arranged differentially. It is optimized to achieve a homogeneous sensitivity distribution in the sensing region. Electrical models of the oil-saline separation processes are established. Experiments under different oil and saline fractions, different agitation speeds, and durations are conducted to validate the capability of the system.