The microstructural integrity of Ni-based fuel electrodes is important for long-term solid oxide fuel cell (SOFC) operation. Degradation due to microstructural changes such as Ni-agglomeration, coarsening, and densification must be prevented by an appropriate microstructure. Here, the performance of four types of nickel-ceria-based fuel electrodes, which differ concerning layer sequence and manufacturing processes, was evaluated by electrochemical impedance spectroscopy at the nominal operating temperature of 600 °C. Electrodes produced through screen-printed GDC exhibited an acceptable polarization resistance (0.260 Ωcm2), whereas electrodes with an additional printed Ni/GDC layer demonstrated inferior performance (0.550 Ωcm2). Electrodes formed through infiltration of GDC into the printed GDC-layer displayed unreproducible performance values ranging from 0.16 to 1.20 Ωcm2 despite similar processing. Conversely, electrodes with an extra layer of GDC infiltrated into the Ni-backbone exhibited good performance (0.195 Ωcm2) and stability. Accelerated degradation tests under OCV at increased operating temperatures of 700 and 900 °C were performed on the sample based on a GDC infiltrated Ni-backbone that performed best among reproducible samples. The polarization resistance at 600 °C recorded at the beginning and the end of life increased by up to 100%. Microstructural analysis of the electrodes at different aging states revealed strong microstructural changes of fine-infiltrated GDC structures and Ni agglomeration at higher operating temperature.
Durability testing of low temperature solid oxide cells is challenging as degradation phenomena related to microstructural changes like nickel‐agglomeration are slow. In the present study, a nickel/gadolinia doped ceria (GDC) fuel electrode with a porous GDC‐interlayer towards the zirconia electrolyte was investigated. The electrode, designed for operating temperatures of 600°C, was tested at an elevated temperature of 900°C for up to 1100 h to accelerate aging. Contrary to every expectation, the electrodes showed continuous improvement in electrochemical performance. Impedance spectroscopy, the distribution of relaxation times analysis, scanning electron microscope and transmission electron microscope were applied to correlate electrochemical and microstructural changes. Structural analysis showed a significant Ni agglomeration accompanied by a decrease in triple phase boundary density. Furthermore, a minor particle growth in the GDC‐phase decreased the volume‐specific double phase boundary GDC/pore. Considering these microstructural changes, the decrease in active reaction sites should have increased the polarization resistance, but a decrease of about 32% was observed. The discrepancy between polarization resistance improvement and microstructural degradation might be attributed to an activation of the GDC‐surfaces in the electrode and the porous GDC‐interlayer.
28 March 2025 in Journal of the Electrochemical Society
Solid oxide fuel cells (SOFCs) are becoming increasingly important due to their high electrical efficiency, the flexible choice of fuels and relatively low emissions of pollutants. However, the increasingly growing demands for electrochemical devices require further performance improvements as for example by reducing degradation effects. Since it is well known that the 3D electrode morphology, which is significantly influenced by the underlying manufacturing process, has a profound impact on the resulting performance, a deeper understanding for the structural changes caused by modifications of the manufacturing process or degradation phenomena is desirable. In the present paper, we investigate the influence of the annealing time and the operating temperature on the 3D morphology of SOFC anodes using 3D image data obtained by focused-ion beam scanning electron microscopy, which is segmented into gadolinium-doped ceria, nickel and pore space. In addition, structural differences caused by manufacturing the anode via infiltration or powder technology, respectively, are analyzed quantitatively by means of various geometrical descriptors such as specific surface area, mean geodesic tortuosity, and constrictivity. The computation of these descriptors from 3D image data is carried out both globally as well as locally to quantify the heterogeneity of the anode structure.
Nanomaterials were used for the investigation of electrochemical performance tests of solid oxide fuel cells. Two different approaches were chosen to produce symmetrical nanoparticle (NP)‐based cells: screen printing and infiltration. Screen printing, as a state‐of‐the‐art manufacturing process, leads to unstable NiO/gadolinium‐doped ceria (GDC) conductive layers, which either show delamination or flaking after sintering or electrochemical testing. The infiltration of an NiO scaffold with GDC NPs and the infiltration of a GDC scaffold with NiO NPs, on the other hand, were used as a solution for these problems, and stable symmetrical cells with particle sizes down to 10 nm were produced. All stable infiltrated cells were microstructurally and electrochemically characterized and showed an improved electrochemical performance.
1 October 2024 in Journal of the Electrochemical Society
This study validates a novel method for simultaneous durability testing of multiple symmetrical cells with Ni/ceria fuel electrodes. The investigation demonstrates that gas diffusion losses in the multi-cell test setup utilizing the active driven gas layer concept have a smaller impact on cell performance compared to the single-cell setup. This method proves effective for testing multiple identical cells, offering a time and cost-efficient approach. However, testing symmetrical cells with different fuel electrodes reveals an unexpected pseudo-inductive loop in the impedance spectra, observable only in the multi-cell setup. Analysis of impedance spectra and relaxation times indicates that differences in electrode polarization resistance result in varying gas compositions at the two electrodes of a cell, disrupting symmetry and superimposing an additional Nernst voltage term. To understand this, an electrical equivalent circuit model with the Nernst voltage term was developed to reproduce the observed behavior. Comparison of experimental and simulation results substantiates the model and elucidates the mechanisms. The findings indicate that testing multiple cells with the active driven gas layer concept is applicable only for identical cells and not for those with different electrodes.