The Giant Mine, Yellowknife, NT, Canada (1948-1999) is undergoing one of the largest remediation projects in Canadian history. Closure and long-term management of tailings containment areas (TCA) is strengthened by hydrogeochemical investigation of mechanisms controlling contaminant metal(loid) release and attenuation. The Northwest TCA (NW-TCA) at the mine (As: 2890 ± 730 mg kg⁻¹; Sb: 210 ± 71 mg kg⁻¹) stores roaster residue and flotation tailings and has been subjected to weathering for the past 25 years. The TCA also retains mine dewatering effluent (As: 22.2 ± 4.7 mg L-1; Sb: 0.79 ± 0.11 mg L-1) prior to treatment. This study integrates solid-phase characterization, aqueous geochemistry, and in situ gas measurements to delineate depth dependent dissolution and attenuation processes. Acid-base accounting indicates the tailings pose low or no acid-generation risk. Oxygen gas concentrations indicate sulfide oxidation extends to 4 m depth. Oxidative dissolution of sulfide minerals in the vadose zone releases As, Sb, Zn, Co, Ni, and Cu to the porewater. A portion of this As is subsequently incorporated into secondary Fe(III)-(oxyhydr)oxide phases. Below the oxidation zone, reducing conditions drive As and Sb release by reductive dissolution of Fe(III)-bearing roaster calcines. At the base of the TCA, highly reducing conditions result in partial As sequestration through sulfate reduction and secondary As sulfide precipitation. Infiltration of mine dewatering effluent has resulted in elevated groundwater As in areas influenced by the holding pond. Effective management of As and Sb requires consideration of spatial- and temporal-dependent mobilization and attenuation processes within the TCA.