1 April 2020 in Science Progress
Field studies by squeezing rock deformation have shown that large deformation slips can occurs in tunnels in squeezing rock, the tunnels may be partially or completely broken. This article proposed two schemes for controlling the deformation of squeezing rock, which are “resistance combine release” Scheme 1 and “strong support” Scheme 2, the deformation characteristics and deformation mechanism of squeezing rock is researched by Zhongyi Tunnel. The results show that Scheme 2 is superior to Scheme 1 in terms of deformation rate, cumulative deformation, and monthly construction footage. Research results can provide a reference for similar projects.
1 January 2020 in Advances in Materials Science and Engineering
In order to improve the structural safety and stability of the tunnels crossing stick‐slip fault, an indoor model test on the effect of tunnel antibreaking measures under the influence of fault stick‐slip movements was conducted. Using contact pressure, longitudinal strain, and safety factor, the antibreaking effect of tunnels was compared and analyzed under 5 kinds of operating conditions, mainly including no measures, structural strengthening, structural strengthening and reducing dislocation layer, structural strengthening and reducing dislocation joint, structural strengthening and reducing dislocation layer, and reducing dislocation joint. The results showed that the longitudinal strain and contact pressure of the tunnel changed markedly (from severe change to more uniform change) when the reducing dislocation measures were adopted in the test, reducing dislocation layer/joint or reducing dislocation layer and reducing dislocation joint. The effect of reducing the fault stick‐slip dislocation on the tunnel structure is very limited by only taking structure strengthening measures. The effect of reducing the fault stick‐slip dislocation on the tunnel structure is obvious by using the reducing dislocation method, and the minimum safety factor is increased by more than 8 times. The effect of resisting and reducing the fault stick‐slip dislocation on the tunnel structure is remarkable by adopting the measures of the structural strengthening and reducing dislocation layer and reducing dislocation joint, and the minimum safety factor is increased by more than 25.45 times. The results can provide reference for the design of antibreaking for the stick‐slip fault tunnel in high earthquake intensity and dangerous mountainous areas.
1 January 2020 in Advances in Materials Science and Engineering
Adding fiber can improve the brittleness of plain concrete. Compared with plain concrete, basalt fiber‐reinforced concrete has the advantages of strengthening, toughening, and crack resistance. Compared with steel fiber‐reinforced concrete, basalt fiber‐reinforced concrete has better construction performance. Basalt fiber concrete is a type of inorganic material with environmental protection and high mechanical properties, which has an important mechanical advantage for controlling the deformation of the soft surrounding rock tunnel. Through the indoor model test of mechanical behavior of reinforced concrete and basalt fiber‐reinforced concrete lining, the bearing characteristics of basalt fiber‐reinforced concrete lining was studied. The results show that, compared with reinforced concrete, the initial crack load of basalt fiber‐reinforced concrete is increased by 20%; the toughness of lining structure is enhanced by adding basalt fiber, and the lining can still bear large bending moment and deformation after the initial crack appears; after the initial crack appears, the bearing characteristic curve of reinforced concrete lining rises slowly and converges rapidly; the bearing characteristic curve of basalt fiber‐reinforced concrete lining rises slowly, and there is no sign of convergence when it reaches 2 times of initial crack load. For the soft surrounding rock tunnel, it is necessary to seal the rock surface as early as possible, provide support as soon as possible, and have a certain deformation capacity. Basalt fiber‐reinforced concrete can better meet these needs.
14 October 2020 in Shock and Vibration
In order to study the antibreaking effect of the fiber reinforced concrete lining in the tunnel, this paper takes the a subway tunnel engineering project in F2-3 section of Jiujiawan fault as the research background and carries out the antibreaking model test of the fiber reinforced concrete lining in the active fault zone of high earthquake intensity. The results show that the antibreaking effect of the principle stress and the longitudinal strain of the fiber reinforced concrete lining are 3040 and 8090, respectively, and the minimum value of the structural safety factor is increased by 45 times. The antibreaking effect of hybrid fiber reinforced concrete lining is better than that of steel fiber reinforced concrete lining. The safety of steel polypropylene hybrid fiber reinforced concrete tunnel lining is the highest, and its minimum structural safety factor is 1.62. In the aspect of improving the antibreaking effect of the tunnel, the toughening effect of fiber reinforced concrete is stronger than that of reinforcing. The research results are of great significance to improve the antibreaking effect of tunnels in active fault areas with high earthquake intensity.
21 August 2020 in Mathematical Problems in Engineering
At present, the tunnel design specifications in China do not provide a clear and systematic intelligent evaluation system of tunnel frost damage in cold regions. Based on the research results of 122 seasonal frozen soil tunnels in high-latitude areas of China, four key influencing factors of geohydrology, temperature, surrounding rock, and engineering measures were determined, the intelligent fuzzy comprehensive evaluation model was established, the weights of all factors were considered, and the intelligent evaluation technology system of tunnel frost damage in cold areas had been put forward. Meanwhile, the rationality of the intelligent model was verified by a specific engineering case. The research suggests that the intelligent evaluation model of tunnel frost damage proposed in this paper can accurately describe the relationship of influencing factors of tunnel frost damage in cold areas, the weight of each influencing factor is calculated by using analytic hierarchy process, and the main risk sources of tunnel frost damage in cold areas are found out. The intelligent evaluation model is an efficient and practical method for Intelligent prediction of frost damage. By using the subordinate function method, the improvement from qualitative analysis to quantitative index calculation is realized. The blindness of engineering analogy construction is avoided, and the scientificity and accuracy of renovation measures for frost damage have been improved. At the same time, the research results provide a theoretical basis for the improvement of the intelligent evaluation system of tunnel frost damage in cold regions.
1 January 2020 in Advances in Civil Engineering
Tunnels in soft rock with high ground stress will encounter the problem of large deformation of surrounding rock. The study of new high‐performance tunnel lining materials is of great significance to improve the safety of tunnel excavation in soft rock with high ground stress. In this paper, the bearing characteristics of the plain concrete, the reinforced concrete, and the steel fiber reinforced concrete lining are studied by the indoor model experiment. By extracting the displacement and stress data of typical parts of lining, the bearing characteristics of the steel fiber reinforced concrete lining are analyzed and summarized. The test results show that the initial crack load and ultimate load of the steel fiber reinforced concrete lining are significantly higher than those of the other two materials, and the crack development path is more tortuous, and the number of cracks is greater. Steel fiber can improve the bearing capacity and deformation capacity of the lining structure so that the failure mode of the lining structure changes from brittle shear failure to ductile bending failure. It is concluded that steel fiber reinforced concrete can improve the toughness of lining. Because of its excellent mechanical properties, steel fiber reinforced concrete can completely replace the conventional reinforced concrete as a new lining material for soft rock tunnel. The above research results are of great significance to the design and construction of tunnel lining in the soft surrounding rock.