Mainly with respect to biotechnological cases, current developments in the field of impeller geometries and findings for multistage configurations with a specific view on aerated stirred tanks are reviewed. Although often the first choice, in the given case the 6‐straight blade disc turbine is usually not the best option. Furthermore, quantities usable for scale‐up, specifically applicable in this field are discussed. Only quantities taking local conditions into account appear to be able to actually compare different stirrer types and scales.
1 November 2020 in Biochemical Engineering Journal
The productivity of Aspergillus niger cultivations is strongly linked to the pellet morphology. In this article, the agitation‐ and aeration‐induced stress on bio agglomerates is studied. To facilitate investigations, non‐biological particle systems are extensively used to model the actual biological matter. The literature lacks a direct comparison of model systems with the biological system of interest, leaving uncertainties in the applicability of such systems. This work shows that the results for the impellers' stress intensity of three A. niger strains agree qualitatively with the ones of four developed model systems of different nature (s/l, l/l). The findings justify the usage of model systems, despite certain limitations originating from their specific characteristic properties.
The dynamic behavior of a toluene/NaOH solution system was studied in a batch stirred tank. Characterization by step response experiments showed that the drop size response to stirrer speed steps behaves as a first‐order system, whereas the stirrer speed responds as a second‐order system. The respective time constants differed by at least one order of magnitude, suggesting effective control of the drop size is feasible by adjusting the stirrer speed. Based on experimental data, simple, linear system models were derived for the mean drop diameter and the interfacial area using the stirrer speed as input variable. Validation experiments showed good model qualities of about 70 % and the design of test trajectories proved the model's usability in an open‐loop control.