Lentil semolina was extruded in a laboratory single screw extruder (Brabender 20 DN, Germany) with screw diameter 19 mm and die diameter 5 mm. Effects of moisture content, barrel temperature, metering zone temperature, screw speed, and screw compression ratio on hardness of the extruded products were studied. Response surface methodology with combinations of moisture content (18, 22, 25, 28, 32%), metering zone temperature (136, 150, 160, 170, 184° C), barrel temperature (136, 150, 160, 170, 184° C), screw speed (132, 160, 180, 200, 228 rpm), and screw compression ratio (1:1, 2:1, 3:1, 4:1, 5:1) was applied. Feed screw speed was fixed at 70 rpm. Feed zone temperature was kept constant at 150° C. The hardness of the extrudates was measured with a TA.XT Plus Texture Analyser, Stable Micro Systems. The textural profiles of the extrudates showed that feed moisture had the highest effect on the hardness.