The formation and accumulation of ice can induce serious economic damage. Eco-friendly anti-icing/de-icing surfaces have been developed to address these problems. Superhydrophobic photothermal coatings have received significant attention in recent years, but an anti-icing/de-icing coating which is robust and facile to prepare is highly desired. Herein, a fluorine-free MnO2/PDMS superhydrophobic coating was prepared using a facile spraying method. The excellent superhydrophobicity (water contact angle of 162.3°) and good self-cleaning properties were due to the surface microstructure of micron/nano-scale MnO2 with the “lotus leaf effect”, while the coating was able to maintain efficient photothermal properties over time, with excellent passive anti-icing and active de-icing properties. In terms of mechanical durability, it was subjected to severe tests (sandpaper abrasion, tape-peeling, sand-washing, sonic treatment) and maintained good robustness. Based on the photothermal properties of MnO2 and the superhydrophobicity of the coating, it could have multiple applications, such as personal thermal management, oil–water separation, and solar-steam generation. This study provides a potential anti-icing/de-icing coating for large-scale preparation and multiple practical applications.
Great efforts have been dedicated to finding economic and efficient oxygen reduction reaction (ORR) for fuel cell technology. Among various catalysts, N-doped carbon-based nanomaterials have attracted much attention due to low-cost, noble metal free, and good durability. Herein, we developed a facile and economic strategy to prepare nitrogen-doped carbon networks for efficient ORR application. The g-C3N4 is used as the template and N source, and dopamine is used as the carbon source. By simple hydrothermal treatment and sintering, N-doped carbon network structures with high specific surface area, effective ORR activity, and superior durability could be acquired. The present strategy is free of involving generally multistep, poisonous reagents, and complication of removing template for fabrication of 3D carbon structures.