27 November 2017 in Energy & Environmental Science
LLLuisa Schulze Langenhorst
Luisa Schulze Langenhorst
+6
A well-to-wheel LCA shows that OME1could serve as an almost carbon-neutral blending component in diesel while even also strongly reducing the NOx and soot emissions.
21 May 2020 in Green Chemistry
Three-step procedure for early-stage evaluation of CO2utilization technologies based on TRLs.
14 April 2023 in Computers & Chemical Engineering
1 December 2018 in Applied Energy
18 August 2023 in Journal of Energy Storage
1 March 2015 in Combustion and Flame
Oxy-fuel combustion of sour gas, a mixture of natural gas (essentially methane (CH[subscript 4])), carbon dioxide (CO[subscript 2]), and hydrogen sulfide (H[subscript 2]S), could enable the utilization of large natural gas resources, especially when combined with enhanced oil recovery. In this work, a detailed chemical reaction mechanism for oxy-fuel combustion of sour gas is presented. To construct the mechanism, a CH[subscript 4] sub-mechanism was chosen based on a comparative validation study for oxy-fuel combustion. This mechanism was combined with a mechanism for H[subscript 2]S oxidation, and the sulfur sub-mechanism was then optimized to give better agreement with relevant experiments. The optimization targets included predictions for the laminar burning velocity, ignition delay time, and pyrolysis of H[subscript 2]S, and H[subscript 2]S oxidation in a flow reactor. The rate parameters of 15 sulfur reactions were varied in the optimization within their respective uncertainties. The optimized combined mechanism was validated against a larger set of experimental data over a wide range of conditions for oxidation of H[subscript 2]S and interactions between carbon and sulfur species. Improved overall agreement was achieved through the optimization and all important trends were captured in the modeling results. The optimized mechanism can be used to make qualitative and some quantitative predictions on the combustion behavior of sour gas. The remaining discrepancies highlight the current uncertainties in sulfur chemistry and underline the need for more accurate direct determination of several important rate constants as well as more validation data.Siemens Corporatio