13 April 2016 in Journal of Materials Chemistry A
This study presents a facile strategy to construct three-dimensional graphene network (3DGN) and metal–organic framework (MOF)-derived metal oxide composites as free-standing electrodes for supercapacitors for the first time. A Mn-based MOF is first grown in situ on a 3DGN substrate through a simple solution immersion method, and then a high-temperature treatment has resulted in the formation of a 3DGN decorated with Mn2O3 with a nanowire stacking flower-like morphology. The structure and morphology of the as-prepared samples are investigated by powder X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy analysis, scanning electron microscopy, elemental mapping, and transmission electron microscopy. The designed 3DGN/Mn2O3 electrode material exhibits a high specific capacitance of 471.1 F g−1 (0.21 F cm−2) at 0.2 A g−1, good rate capability of 57.3% at 5 A g−1 relative to the initial value at 0.2 A g−1, and excellent long-cycle stability without decaying after 1800 charge–discharge cycles. The remarkable electrochemical performances originate from the synergistic effect of the high electrical conductivity and large surface area of the 3DGN along with the superior pseudocapacitance activity of Mn2O3 nanowires. This result suggests that the 3DGN/MOF-derived metal oxide composites are promising and efficient binder-free electrode materials for high-performance supercapacitors.
1 July 2008 in Materials Chemistry and Physics
30 October 2017 in Journal of Materials Chemistry A
Carbon-coated α-Fe 2 O 3 hollow nanospindles and varied-phase Fe 2 O 3 @C (γ-Fe 2 O 3 @C, αγ-Fe 2 O 3 @C, and α-Fe 2 O 3 @C) nanobipyramids were prepared by controlling pyrolysis of MIL-88A nanobipyramids at different temperature and time in air or nitrogen, exhibiting advanced lithium storage capacities.
27 January 2010 in Chemical Communications
A water-insoluble photocatalyst constructed from Wells–Dawson polyoxometalates and hexacopper phosphates has been prepared, exhibiting good photocatalytic activity in the presence of H2O2 under visible light irradiation.
17 June 2024 in Journal of Materials Chemistry A
Porous carbon materials as one of the most promising electrodes for energy storage and conversion devices have attracted considerable attention because of their large specific surface area, well-developed pore structure, excellent electrical conductivity and low cost. However, the traditional production of porous carbon is often accompanied by complex synthesis conditions, environmental pollution and large energy consumption. Herein, a new type of B/N/P co-doped porous carbon (OPBNP) was prepared using a simple hydrothermal doping method combined with a low-temperature carbonization–activation process using orange peel (OP) as the precursor, and boric acid and diammonium phosphate as co-dopant. The carefully regulated elemental doping and low carbonization temperature (600 °C) endow the prepared OPBNP material with a high specific surface area (1774.8 m2 g−1), microporous-dominated hierarchical structure, larger graphite interlayer spacing (0.392 nm), and more defects. The combination of structurally strategic design and multi-atom doping promotes fast charging and long-lasting stability. As electrodes in supercapacitors (SCs), the OPBNP delivers a superior specific capacitance of 289 F g−1 at 5 A g−1 with 93.6% capacitance retention after 10 000 cycles. Besides, the assembled OPBNP//OPBNP symmetric supercapacitor could reach a high energy density of 8.9 W h kg−1 at a power density of 499.7 W kg−1. Furthermore, as anodes for sodium ion batteries (SIBs), OPBNP exhibits a high reversible capacity of 292.3 mA h g−1 after 100 cycles at 0.1 A g−1 and an excellent cycling performance of 206.6 mA h g−1 after 1000 cycles at 1 A g−1. The B/N/P co-doped porous carbon has the characteristics of low cost, simple preparation and excellent properties, making it a great potential electrode for advanced supercapacitors and sodium ion batteries.
1 November 2016 in Materials Research Bulletin