25 January 2016 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Recently, interchip/intrachip optical interconnection networks have been proposed for ultrahigh-bandwidth and low-latency communications. These networks employ the microresonators (MRs) to modulate, direct, or detect the optical signal. However, utilized MRs suffer from intrinsic crosstalk noise and signal power loss, degrading the network efficiency via the signal-to-noise ratio (SNR). The amount of crosstalk noise and signal power loss may differ from network to network. Hence, there exists a need to systematically analyze the effect of the crosstalk noise and the power loss issues. In this paper, we have developed the analytical models considering both coherent and incoherent crosstalk for both the interchip and intrachip optical networks. The interchip/intrachip optical interconnection networks—the $\text{I}^{2}$ CON—are analyzed as a case study. The quantitative results on the individual networks have demonstrated that the architectural design determines the impact of crosstalk on the SNR. We have also demonstrated that the optical interconnection networks with interchip/intrachip interconnects result in better bit error rate (BER) compared with that of only intrachip interconnect. Our analyses of the worst case can be utilized as a platform to compare the realistic performance among different optical interconnection networks via the degradation of SNR/BER and data bandwidth.
10 July 2015 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
With the fast development of processor chips, power-efficient, high-bandwidth, and low-latency interchip interconnects become more and more important. Studies show that the bandwidth of traditional parallel interconnects with low I/O clock frequencies will become bottlenecks in the near future. To solve this problem, two types of high-bandwidth interchip interconnects are developed. Low-swing differential electrical interconnects have widely been used in high-speed I/O designs. On the other hand, optical interconnects promise high bandwidth, low latency, and could improve the chip pin performance for manycore processors. They are becoming potential alternatives for electrical interconnects. This paper systematically models these two types of interconnects in terms of crosstalk noises, attenuation, and receiver sensitivities. Based on the proposed models, we developed optical and electrical interfaces and links (OEIL) and an analysis tool for OEIL. The OEIL can be used to analyze the energy consumption, bandwidth density, and latency of interconnects. Analytical models are verified by the results of published experiments. It shows that the optical interconnects have much higher bandwidth densities than the electrical interconnects. With this feature, the optical interconnects can significantly reduce I/O pin count compared with the electrical interconnects. For example, they can save at least 92% signal pins when connecting chips more than 25 cm (10 in) apart. The energy consumption of optical interconnects is comparable with that of electrical interconnects, and the latency of polymer waveguide-based optical interconnects is 18% less than that of electrical interconnect.
16 May 2018 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
RMRafael Kioji Vivas Maeda
Rapidly evolving embedded applications continuously demand more functionalities and better performance under tight energy and thermal budgets, and maintaining high energy efficiency has become a significant design challenge for mobile devices. Learning-based methods are adaptive to dynamic conditions and show great potential for runtime power management. However, with the ever-increasing complexity of both hardware and software, it is a challenging issue for a learning agent to explore the state-action space sufficiently and quickly find an efficient management policy. In this work, we propose a reinforcement learning-based multi-device collaborative power management approach to address this issue. Multiple devices with different runtime conditions can acquire related knowledge during the learning process. Efficient knowledge sharing among these devices can potentially accelerate the learning process and improve the quality of the learned policies. We integrate the proposed method with dynamic voltage and frequency scaling (DVFS) on the multicore processors in mobile devices. Experimental results on realistic applications show that the collaborative power management can achieve up to a 7x speedup and 10% energy reduction compared with state-of-the-art learning-based approaches.
23 June 2016 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
The design of power delivery system plays a crucial role in guaranteeing the proper functionality of many-core processor systems. The power loss suffered on power delivery has become a salient part of total power consumption, and the energy efficiency of a highly dynamic system has been significantly challenged. Being able to achieve a fast response time and multiple voltage domain control, on-chip voltage regulators (VRs) have become popular choices to enable fine-grain power management, which also enlarge the design space of power delivery systems. This paper analytically studies different power delivery system paradigms and power management schemes in terms of energy efficiency, area overhead, and power pin occupation. The analysis shows that compared to the conventional paradigm with off-chip VRs, hybrid paradigms with both on-chip and off-chip VRs are able to maintain high efficiency in a larger range of workloads, though they suffer from low efficiency at light workload. Employed with the quantized power management scheme, the hybrid paradigm can improve the system energy efficiency at light workload by a maximum of 136% compared to the traditional load balanced scheme. Besides this, the in-package (iP) hybrid paradigm further shows its advantage in reducing the physical overheads. The results reveal that at 120 W workload, it occupies only a 10.94% total footprint area or 39.07% power pins of that of the off-chip paradigm. We conclude that the iP hybrid paradigm achieves the best tradeoffs between efficiency, physical overhead, and realization of fine-grain power management.