The transmission of a 65,536-ary quadrature amplitude modulation (QAM) orthogonal frequency division multiplexing (OFDM) signal supported by a hybrid fiber–terahertz (THz) multiple-input multiple-output (MIMO) system at 320 GHz is experimentally demonstrated in this Letter. We adopt the polarization division multiplexing (PDM) technique to double the spectral efficiency. Based on a 23-GBaud 16-QAM link, 2-bit delta-sigma modulation (DSM) quantization enables 65,536-QAM OFDM signal transmission over a 20-km standard single-mode fiber (SSMF) and a 3-m 2 × 2 MIMO wireless delivery, and satisfies the hard-decision forward error correction (HD-FEC) threshold of 3.8 × 10−3, corresponding to a net rate of 60.5 Gbit/s for THz-over-fiber transport. Meanwhile, below the fronthaul error vector magnitude (EVM) threshold of 0.34%, a maximum signal-to-noise ratio (SNR) of 52.6 dB is achieved. To the best of our knowledge, this is the highest modulation order achievable for DSM applications in THz communication.
23 January 2025 in Journal of Lightwave Technology
Electronic nonlinear equalization technology is a promising signal impairments compensation technique with great development potential and wide application scenarios. However, its high complexity makes it challenging to implement in field-programmable gate array (FPGA). We propose a low-complexity real-time nonlinear equalization scheme based on FPGA, which can provide similar performance as traditional schemes but only occupies very low digital signal processing (DSP) resources. With the help of this scheme, by using pruning and non-uniform quantization, the computational complexity of a Volterra equalizer with 15 linear taps and 25 nonlinear taps is comparable to that of a Volterra equalizer with 8 linear taps and 4 nonlinear taps. By non-uniformly quantizing the taps of the equalizer, the quantization accuracy can be saved compared to uniform quantization, and after the taps are quantized, complex multiplication can be replaced by simple shift operations, simplifying the complexity of multiplication operations. The scheme of weight pruning and non-uniform quantization significantly reduces the required hardware resources and power consumption. We verify the proposed scheme in a decision-directed Volterra (DD-Volterra) equalizer, The equalizer was successfully deployed in a 230.4MHz xcvu9pflgb2104-2-I Xilinx FPGA and achieved real-time IM/DD transmission of 29.4912Gbit/s PAM4 signals over 25km standard single-mode fiber (SSMF), meeting the 3.8×10-3 hard-decision forward error correction (HD-FEC) standard. The results show that the proposed low-complexity Volterra equalizer scheme can reduce DSP resources by up to 75.3% and power consumption by 26.2%.
11 September 2023 in Journal of Lightwave Technology
The probabilistic shaping (PS) technique can effectively reduce the average power of the transmitted signal by transmitting high-energy symbols with low probability and low-energy symbols with high probability, which helps to improve the tolerance of the system to the nonlinear effect of fiber. In this work, a low-complexity intra-symbol bit-weighted distribution matching (Intra-SBWDM)-based PS 16-ary quadrature amplitude modulation (PS-16QAM) scheme is implemented with a commercial off-the-shelf field programmable gate array chip for discrete multi-tone wavelength division multiplexing passive optical network (DMT-WDM-PON) communications. The Intra- SBWDM scheme, which has less computational and hardware complexity than traditional PS schemes like Gallager many-to-one mapping, hierarchical distribution matching, prefix-free code distribution matcher with framing and constant composition distribution matching, does not require look-up table or nor does it need to continuously refine the interval in order to determine the target symbol probability. As a result, it does not add a significant amount of extra redundant bits. The real-time experimental results show that the PS-DMT signals with a net rate of 131.88-Gb/s transmission over 25-km standard single-mode fiber can be achieved with the BER less than 3.8 × 10 −3 compared to uniformly-distributed DMT. More importantly, the BER performance measured in real-time has good stability during the one-hour measurement period for PS-16QAM DMT-WDM-PON transmission system.
28 October 2024 in Journal of Lightwave Technology
The utilization of probabilistic shaping (PS) techniques effectively mitigates the average power of the transmitted signal by optimizing modulation mapping schemes, which helps to improve the resistance of the wireless transmission system to the nonlinear effect induced by envelope detection. In this work, we have experimentally demonstrated FPGA-based real-time photonics-assisted W-band with envelope detection 23 Gb/s PS 64-ary quadrature amplitude modulation (64QAM) discrete multi-tone (DMT) signals over 40.5-m wireless link. In addition, an intra-symbol two-stage bit-weighted distribution matching-based PS-64QAM scheme was implemented based on FPGA to alleviate nonlinear damage caused by envelope detector. This PS-64QAM scheme has the advantages of no complex multiplication, division operations and low hardware implementation complexity. According to experimental results, by adopting our proposed PS-64QAM scheme, the receiver sensitivity can be significantly improved. This study demonstrates the attainment of the greatest wireless range to date through FPFA-based real-time photonics millimeter wave envelope detection for wireless communication. The results underscore the feasibility of integrating millimeter wave photonics, electronics, and advanced DSP algorithms to accomplish high-speed wireless communication over long distances in real time. This will provide important assistance for our future work in real-time photonics- assisted millimeter wave wireless communication.
A terahertz (THz)-over-fiber multiple-input multiple-output (MIMO) transmission of 4096-ary quadrature amplitude modulation (QAM) orthogonal frequency division multiplexing (OFDM) supported by 46-GBaud quadrature phase shift keying (QPSK) signal at 320 GHz is experimentally demonstrated in this letter. By employing the polarization division multiplexing (PDM) technique and 1-bit delta-sigma modulation (DSM) quantization, we successfully implement 4.6-GHz 4096-QAM OFDM signal transmission over 20 km of standard single-mode fiber (SSMF) and a 3-m MIMO wireless link, and satisfy the soft-decision forward error correction (SD-FEC) threshold of 1.0 × 10 -2 with 15% overhead, which corresponds to a net rate of 84.4 Gbps for THz-over-fiber transmission. To the best of our knowledge, fusing OFDM and PDM, this is the highest rate achievable for DSM applications in THz communication. This experimental demonstration can provide a promising solution for high-order QAM signals in a fiber-wireless seamless network in future 6G networks.
In this experiment, we demonstrated an intensity modulation and direct-detection (IM/DD) system based on a field-programmable gate array (FPGA). The PAM8 signals are successfully delivered at 44.2368 Gbit/s over a 45-km standard single-mode fiber (SSMF), satisfying the soft-decision forward error correction (SD-FEC) criterion of 2.4 × 10−2, and the net bit rate may reach 36.864 Gbit/s without the need of optical amplifiers. At the transmitter, we used a pruned pre-equalization algorithm to process the PAM8 signals, and the high-speed parallel PAM8 signals were processed at the receiver using 64 parallel constant modulus algorithm (CMA) and decision-directed least mean square (DD-LMS) equalizers. Additionally, we analyzed the bit error rate (BER) performance of the DD-LMS equalizer in FPGA simulation with various data lengths, both before and after equalization.