The nucleation and growth of atomic layer deposited (ALD) vanadium oxide and sulfide layers were examined on the surface of sapphire and silicon. The growth of vanadium oxide was layer by layer on sapphire, but islandlike on silicon. The stable growth rates could be derived from the steric hindrance of the precursor molecules. The nucleation of vanadium sulfide was always islandlike. The merging of the islands, and, thus, continuous film growth, could be achieved by enhancing the surface active sites by chemical pretreatments, as well as by starting the ALD growth by longer cycles. With the combination of these approaches, ultrathin continuous VO2 and VS layers could be grown. The nucleation was also modeled mathematically, and the unknown starting boundary conditions could be derived from the model fitting.
10 February 2025 in Journal of Vacuum Science & Technology A
The present paper reports on the atomic layer deposition of vanadium sulfide (VS) layers from tetrakis(ethylmethylamino)vanadium and H2S. The deposition of VS layers with these precursors has proven possible between 200 and 300 °C. The prepared layers were amorphous, but a postdeposition annealing in H2S atmosphere yielded crystalline VS layers. The use of this precursor combination has so far not been reported.
25 March 2026 in Journal of Vacuum Science & Technology A
The initial stages of the atomic layer deposition of metal-sulfide thin films are hindered by delayed nucleation and poor film continuity. The present work explores the nucleation of gallium sulfide (GaSx) films using hexakis(dimethylamino)digallium and H2S as precursors. Smooth amorphous GaSx layers were deposited, with their composition confirmed by XPS and their structure examined by TEM. Postdeposition annealing in H2S was attempted to induce crystallinity. To address the nucleation barrier, a novel surface functionalization strategy was developed: replacing surface hydroxyl groups with sulfur-containing species prior to deposition. Different functionalization treatments were tested, which significantly enhanced nucleation, as demonstrated by accelerated initial growth and improved film uniformity even at low cycle numbers. These results establish chemically specific surface functionalization as an effective strategy to promote controlled nucleation of sulfide thin films.