The influence of liquid metal feeding on the flow and macrosegregation during direct chill (DC) casting of Al-4.5wt-%Cu billets is investigated. An analytical study for constricted inlets predicts that the inflow only reaches the bottom of the sump for narrow inlets, a result confirmed by steady-state axisymmetric simulations of equiaxed solidification. For wide inlets, and inlets using a combo bag, the inflow is swiftly entrained towards the chill and the final macrosegregation predictions are all similar. For narrow inlets without a combo bag, penetration of the thermal jet to the bottom of the sump locally delays solidification producing an inclination in the packed solid interface and the possible growth of columnar dendrites in this region.
An analytical model was developed to predict the infiltration of a non-wetting liquid into a sharp-cornered channel with rough walls. The distance from the liquid meniscus to the corner and the liquid radius of curvature predicted by the model are a function of contact angle, corner angle, head height and surface roughness. Measurements of these lengths were made in a model experiment as a function of liquid head height. The results of the experiments suggest that the analytical model accurately predicts the wetting limit of corner sharpness.