Journal Communications - Scientific Letters of the University of ?ilina is now a well-established open-access scientific journal aimed primarily at the topics connected with the field of transport.
26 June 2024 in The Archives of Automotive Engineering - Archiwum Motoryzacji
In recent years, the development of container transportation served as a powerful impetus for increasing the length of vehicles, especially road trains, which is due to a number of advantages regarding the transportation of large-sized freight in a container. Today, the whole range of containers is transported by two-link road trains consisting of a tractor vehicle and semi-trailer. The efficiency of such transportation can be increased by means of three-link road trains capable of transporting either three (two 20-foot and one 40- or 45-foot) or four 20-foot containers. This organization of transportation will lead to energy savings and a reduction in environmental pollution due to the reduction of vehicles. However, there is a problem with the maneuverability and stability of such vehicles. The paper developed a kinematic model of three-link road train type “B-triple” with steered axles (front or rear) of semi-trailer dolly with a dual drive control for these axles. Based on folding angles of road train links and drive control transmission ratios of the axles of semi-trailer dolly, the main indicators of road train maneuverability are determined – road train links trajectories displacement relative to the vehicle trajectory and road train overall traffic lane. It was established that when entering a turn with slight differences in folding angles of road train links, the steered axles of semi-trailer dolly turn in the direction opposite to the direction of a turn, thereby reducing the overall traffic lane. During circular motion, the overall traffic lane of road train with steered semi-trailers decreased by almost 2 m, but such road train does not meet the maneuverability requirements. The search for ways to improve the maneuverability of three-link road trains should be sought in the designs of three-link road trains.
20 March 2023 in Ukrainian Journal of Applied Economics and Technology
The article conducts a study to identify typical pavement defects and their geometric parameters that affect the nature of vehicle traffic and lead to excessive dynamic loads on road bridges not provided for by the design. Various research methods are used, including measurement of vehicle movement parameters, vehicle movement theory, diagnostics of bridge deck defects, and analysis of the impact of defects on automotive equipment. Accordingly, the results obtained in the article are based on the combination and analysis of information from specialists in road construction and automotive engineering. The results obtained can be used in mathematical modeling of the movement of vehicles over road bridges with defects and damage to the road surface.
5Монографія містить аналіз вимог щодо габаритно-вагових параметрів великовагових транспортних засобів, результати досліджень пропускної здатності доріг і мостів, а також динамічних факторів впливу великовагового рухомого складу. Розроблено сучасні моделі навантаження мостів з урахуванням фактичного складу транспортного потоку. Видання буде корисним для фахівців, що займаються проєктуванням, будуванням, утриманням і ремонтом автомобільних мостів, а також для здобувачів вищої освіти за спеціальністю «Будівництво та цивільна інженерія».
1 January 2024 in Automobile Roads and Road Construction
The parameters of a car wheel and its pneumatic tire, in particular, significantly affect both the dynamics of the vehicle and the nature of its interaction with the road surface. This is explained by the fact that the pneumatic tire of a car wheel is the final element of the car structure which directly interacts with the road surface and transfers all forces and moments (acting in the contact patch with the bearing surface) to its suspension and steering. So, on the one hand, the parameters of the interaction of the car wheel with the bearing surface largely determine the controllability and stability of the car, the passability and smoothness of the ride, the fuel economy and the efficiency of the vehicle use in general, etc.; on the other hand, the level of negative impact of the vehicle on the road surface. Accordingly, the parameters of the car wheel and its interaction with the bearing surface are necessary both in the study of the movement of motor vehicles and in the calculation of road wear. This article presents the results of experimental studies on the determination of the radial stiffness of the pneumatic tire 175/70 R 13 82 T (internal pressure 0.2 MPa) and the size of its contact spot with the support surface at different values of the vertical load on the car wheel. The presented research was carried out within the framework of the project "Development of a load model based on the actual parameters of heavy-duty rolling stock to determine the load-carrying capacity of road bridges during their restoration and operation in the war and post-war periods" under the competition "Science for the reconstruction of Ukraine in the war and post-war periods" the grant support account of the National Research Fund of Ukraine. Keywords: car wheel, pneumatic tire, tire radial stiffness, contact patch between the tire and the supporting surface, road surface, bridge crossing.